Department of Prosthodontics

Permanent URI for this community

https://hdl.handle.net/1805/8271

Browse

Now showing 1 - 10 of 53

Accuracy of digital duplication scanning methods for complete dentures
(Wiley, 2023) Alehaideb, Abdullah; Lin, Wei-Shao; Levon, John A.; Chu, Tien-Min G.; Yang, Chao-Chieh; Prosthodontics, School of Dentistry
Purpose To compare the accuracy of four digital scanning methods in duplicating a complete denture. Material and Methods Four scanning methods were used: cone beam computed tomography (CBCT), Straumann desktop scanner (DS), Trios intraoral scanner (TIO), and Virtuo Vivo intraoral scanner (VVIO). Each method was used to duplicate all the surfaces of a printed complete denture. The denture was scanned 10 times in each group. The trueness (in root mean square, RMS) and precision (in standard deviation, SD) were calculated by comparing the combined dentition, denture extension, and intaglio surfaces with the reference file. One-way analysis of variance and F-tests were used to test statistical differences (α = 0.05). Results For the scanning accuracy of the whole denture, CBCT showed the highest RMS (0.249 ± 0.020 mm) and lowest trueness than DS (0.124 ± 0.014 mm p < 0.001), TIO (0.131 ± 0.006 mm p < 0.001), and VVIO (0.227 ± 0.020 mm p = 0.017), while DS and TIO showed smaller RMS than VVIO (p < 0.001). For the trueness of dentition, denture extension, and intaglio surfaces, CBCT also showed the highest mean RMS and lowest trueness among all groups (p < 0.001). DS and TIO had smaller mean RMS and higher trueness among all groups in all surfaces (p < 0.001, except VVIO in intaglio surface, p > 0.05). TIO had significantly lower within-group variability of RMS and highest precision compared to DS (p = 0.013), CBCT (p = 0.001), and VVIO (p < 0.001) in the combined surface. For dentition and denture extension surfaces, TIO showed similar within-group variability of RMS with the DS group (p > 0.05) and lower than CBCT and VVIO (p < 0.001). Conclusion The 7 Series desktop scanner and Trios 4 intraoral scanner can duplicate dentures in higher trueness than CBCT and the Virtuo Vivo intraoral scanner. The Trios 4 intraoral scanner was more precise in the combined surfaces than other scanning methods, while the 7 Series desktop scanner and Trios 4 intraoral scanner were more precise in the denture extension surface.
Barriers to Dental Care in Individuals with Special Healthcare Needs in Qatif, Saudi Arabia: A Caregiver’s Perspective
(Dove Press, 2021-01-22) Alfaraj, Amal; Halawany, Hassan S.; Al-Hinai, Muntasar T.; Al-Badr, Abid H.; Alalshaikh, Marwa; Al-Khalifa, Khalifa S.; Prosthodontics, School of Dentistry
Objective: Access to dental care is a key factor influencing oral health outcomes. Individuals with special healthcare needs are at risk of not having access to dental care services which they need to maintain their oral health. This study assessed the magnitude of this problem and identified barriers responsible for the difficulties in accessing dental care in Qatif, Saudi Arabia, as reported by caregivers of individuals with special healthcare needs. Methods: This cross-sectional study collected data using a self-administered survey questionnaire from caregivers of individuals with special healthcare needs across 11 centers (eight special needs centers and three schools) in Qatif, Eastern Province of Saudi Arabia, between February and April 2019. Results: A total of 186 caregivers participated in the study, 102 (54.8%) of whom reported difficulties in getting access to dental care. The key barriers included lack of time on the part of caregivers (60.8%), unsuitable clinic environment (53.9%), difficulties with transportation (51.9%), medical/health status of the individual with special healthcare needs (51.0%), and geographically distant dental clinics (51.0%). Caregiver demographics (age, gender, and educational level) had no significant influence on the difficulties reported by caregivers in getting access to dental care for individuals with special healthcare needs (p>0.05). Conclusion: A large proportion of caregivers in Qatif, Saudi Arabia, experience difficulties with access to dental care services for individuals with special healthcare needs. The most common barriers are physical accessibility of dental facilities (for individuals with special healthcare needs), affordability, and lack of skills and knowledge of dental care providers.
Bead-anchored surgical templates for static computer-assisted implant surgery: A dental technique
(Wiley, 2022-10) Orgev, Ahmet; Pellerito, John; Polido, Waldemar; Morton, Dean; Lin, Wei-Shao; Prosthodontics, School of Dentistry
This technique report describes an alternative method to stabilize surgical templates throughout full-arch static computer-assisted implant surgery (FA s-CAIS). In FA s-CAIS, remaining teeth, mucosa, existing implants, custom occlusal device, bone, or any combination thereof, could be used as an initial positioning mechanism to position surgical templates. Different anchoring mechanisms are then used to stabilize the surgical templates during surgery. In this report, a novel design of surgical templates using remaining dentition and opposing occlusal surfaces as initial positioning mechanism followed by the combination of bone block fixation screw and stainless-steel beads as secondary anchoring mechanisms is described. The advantages, limitations, and comparisons with surgical templates using other anchoring mechanisms are also discussed.
Bimix antimicrobial scaffolds for regenerative endodontics
(Elsevier, 2014-11) Palasuk, Jadesada; Kamocki, Krzysztof; Hippenmeyer, Lauren; Platt, Jeffrey A.; Spolnik, Kenneth J.; Gregory, Richard L.; Bottino, Marco C.; Department of Restorative Dentistry, IU School of Dentistry
INTRODUCTION: Eliminating and/or inhibiting bacterial growth within the root canal system has been shown to play a key role in the regenerative outcome. The aim of this study was to synthesize and determine in vitro both the antimicrobial effectiveness and cytocompatibility of bimix antibiotic-containing polydioxanone-based polymer scaffolds. METHODS: Antibiotic-containing (metronidazole [MET] and ciprofloxacin [CIP]) polymer solutions (distinct antibiotic weight ratios) were spun into fibers as a potential mimic to the double antibiotic paste (DAP, a MET/CIP mixture). Fiber morphology, chemical characteristics, and tensile strength were evaluated by scanning electron microscopy, Fourier transform infrared spectroscopy, and tensile testing, respectively. Antimicrobial efficacy was tested over time (aliquot collection) against Enterococcus faecalis (Ef), Porphyromonas gingivalis (Pg), and Fusobacterium nucleatum (Fn). Similarly, cytotoxicity was evaluated in human dental pulp stem cells. Data were statistically analyzed (P < .05). RESULTS: Scanning electron microscopy and Fourier transform infrared spectroscopy confirmed that electrospinning was able to produce antibiotic-containing fibers with a diameter mostly in the nanoscale. The tensile strength of 1:1MET/CIP scaffolds was significantly (P < .05) higher than pure polydioxanone (control). Meanwhile, all other groups presented similar strength as the control. Aliquots obtained from antibiotic-containing scaffolds inhibited the growth of Ef, Pg, and Fn, except pure MET, which did not show an inhibitory action toward Pg or Fn. Antibiotic-containing aliquots promoted slight human dental pulp stem cell viability reduction, but none of them were considered to be cytotoxic. CONCLUSIONS: Our data suggest that the incorporation of multiple antibiotics within a nanofibrous scaffold holds great potential toward the development of a drug delivery system for regenerative endodontics.
Biodegradable nanofibrous drug delivery systems: effects of metronidazole and ciprofloxacin on periodontopathogens and commensal oral bacteria
(Springer-Verlag, 2014-12) Bottino, Marco C.; Arthur, Rodrigo A.; Waeiss, R. Aaron; Kamocki, Krzysztof; Gregson, Karen S.; Gregory, Richard L.; Department of Restorative Dentistry, IU School of Dentistry
OBJECTIVES: The purposes of this study were to fabricate biodegradable polydioxanone (PDS II®) electrospun periodontal drug delivery systems (hereafter referred to as matrices) containing either metronidazole (MET) or ciprofloxacin (CIP) and to investigate the effects of antibiotic incorporation on both periodontopathogens and commensal oral bacteria. MATERIALS AND METHODS: Fibrous matrices were processed from PDS polymer solution by electrospinning. Antibiotic-containing PDS solutions were prepared to obtain four distinct groups: 5 wt.% MET, 25 wt.% MET, 5 wt.% CIP, and 25 wt.% CIP. Pure PDS was used as a control. High-performance liquid chromatography (HPLC) was done to evaluate MET and CIP release. Dual-species biofilms formed by Lactobacillus casei (Lc) and Streptococcus salivarius (Ss) were grown on the surface of all electrospun matrices. After 4 days of biofilm growth, the viability of bacteria on biofilms was assessed. Additionally, antimicrobial properties were evaluated against periodontopathogens Fusobacterium nucleatum (Fn) and Aggregatibacter actinomycetemcomitans (Aa) using agar diffusion assay. RESULTS: A three-dimensional interconnected porous network was observed in the different fabricated matrices. Pure PDS showed the highest fiber diameter mean (1,158 ± 402 nm) followed in a descending order by groups 5 wt.% MET (1,108 ± 383 nm), 25 wt.% MET (944 ± 392 nm), 5 wt.% CIP (871 ± 309 nm), and 25 wt.% CIP (765 ± 288 nm). HPLC demonstrated that groups containing higher amounts (25 wt.%) of incorporated drugs released more over time, while those with lower levels (5 wt.%) the least. No inhibitory effect of the tested antibiotics was detected on biofilm formation by the tested commensal oral bacteria. Meanwhile, CIP-containing matrices inhibited growth of Fn and Aa. CONCLUSION: CIP-containing matrices led to a significant inhibition of periodontopathogens without negatively impairing the growth of periodontal beneficial bacteria. CLINICAL RELEVANCE: Based on the proven in vitro inhibition of periodontitis-related bacteria, future in vivo research using relevant animal models is needed to confirm the effectiveness of these drug delivery systems.
CAD-CAM Hollow Obturator Prosthesis: A Technical Report
(Wiley, 2022) Alfaraj, Amal; Su, Fang-Yu; Lin, Wei-Shao; Prosthodontics, School of Dentistry
An obturator with a hollow bulb can decrease the overall weight of the prosthesis, stress on the underlying tissues, and patient discomfort. Although many techniques and materials have been proposed in the literature for hollowing the obturator prosthesis, they are often time-consuming and technique sensitive. This proposed technique used an open-source software program to hollow digital design of solid obturator base from a commercially available software in one single convenient step. The hollowing process allowed precise control of prosthesis thickness at the hollow space area for desirable hermetic seal and prosthesis strength.
Caregivers' Perception about the Relationship between Oral Health and Overall Health in Individuals with Disability in Qatif, Saudi Arabia: A Cross-Sectional Study
(Hindawi, 2022-10-03) Alalshaikh, Marwa; Alsheikh, Rasha; Alfaraj, Amal; Al-Khalifa, Khalifa S.; Prosthodontics, School of Dentistry
Background: In Saudi Arabia, there are many people with disabilities that do not receive adequate healthcare, especially in the field of dentistry. Objective: This study focused on assessing caregivers' perception of the relationship between oral healthcare and the overall health status of individuals with special healthcare needs (SHCN) in Qatif, Saudi Arabia. Methodology Design. This cross-sectional study was conducted using a questionnaire that was divided into two sections. The first part included demographic information such as the age and gender of both the caregiver and the person with a disability and the type of disability. The second part investigated the systemic health of the individual with a disability and the caregivers' perception of the relationship between the management and treatment of systemic health and oral healthcare in relation to the overall health status. The results of descriptive analyses were summarized using frequency distribution tables. Bivariate analyses (chi-square test) were also performed. Significant differences were considered at a p value of 0.05. Setting. Initiated in school setting. Results: A total of 186 caregivers participated in the study. As much as 83.3% agree that oral health affects overall health, and 48.9% agreed that untreated dental problems could affect cardiac health. Age was the only factor found to be significantly associated with caregiver perception as younger caregivers were more likely to rightly understand the relationship between oral health and general health (p < 0.05). Conclusion: This study has shown the extent to which caregivers of individuals with special care needs to understand the role of oral health in the general health of an individual. Three-quarters of the caregivers agree that dental health affects overall health, and age is a factor that might influence this understanding.
Caries lesion remineralization with fluoride toothpastes and chlorhexidine - effects of application timing and toothpaste surfactant
(SciELO, 2018-06-11) Almohefer, Sami A.; Levon, John A.; Gregory, Richard L.; Eckert, George J.; Lippert, Frank; Restorative Dentistry, School of Dentistry
INTRODUCTION: Habitual toothbrushing with fluoridated toothpaste followed by rinsing with antibacterial mouthwashes is a method to maintain good oral hygiene and to diminish the occurrence and severity of dental caries and periodontal disease. However, our understanding of how antimicrobial agents in mouthwashes affect fluoride-mediated caries lesion remineralization is still poor. OBJECTIVE: The objectives of this in vitro study were a) to determine the effects of the waiting period of chlorhexidine (CHX) rinsing after fluoride toothpaste use and b) to further determine the effect of the type of toothpaste surfactant [sodium dodecyl sulfate (SDS) or cocamidopropyl betaine (CAPB)] on caries lesion remineralization associated with CHX rinsing. MATERIAL AND METHODS: Caries lesions were formed in bovine enamel specimens and assigned to 10 treatment groups (n=18) based on Vickers surface microhardness (VHN). Lesions were then pH-cycled for 10 days with daily regimen comprised of twice daily toothpaste slurry treatments (1150 ppm fluoride, with SDS or CAPB), followed by CHX solution treatments [0, 15, 30 or 60 minutes following slurry treatment or no CHX treatment (negative control)]. VHN was measured again and the extent of lesion remineralization calculated (∆VHN). RESULTS: ∆VHN with SDS-toothpaste was significantly lower than with CAPB-toothpaste, indicating more remineralization for the CAPB-toothpaste. ∆VHN with 0-minute waiting time was significantly lower than with 30-minute waiting time and with negative control. CONCLUSIONS: The absence of CHX as an adjunct to fluoride toothpastes led to greater remineralization of enamel lesions compared with the immediate use of CHX treatment for both SDS- and CAPB-toothpastes. CAPB-toothpastes indicated significantly greater remineralization than SDS-toothpastes, and can be suggested for patients at high risk of caries. A 30-minute waiting time for CHX treatment is recommended after brushing.
Clinical performance of intentionally tilted implants versus axially positioned implants: A systematic review
(Wiley, 2018-10) Lin, Wei-Shao; Eckert, Steven E.; Prosthodontics, School of Dentistry
Objectives The aim of this review was to determine the clinical performance of dental implants that are intentionally tilted when compared with implants that are placed following the long axis of the residual alveolar ridge. Materials and methods A systematic review of the scientific literature using a predefined research question (PICO) and search strategy was undertaken. This search included five electronic databases. Two independent reviewers examined electronic databases and performed a manual review following search strategy to accomplish the item generation and reduction. Included articles were evaluated to determine the level of evidence. Data were extracted only from level I and level II studies, based on the Oxford Centre for Evidence‐based Medicine—Levels of Evidence (March 2009). If included studies were homogeneous in nature, data were to be accumulated. However, if included studies were heterogeneous in nature, only descriptive data would be reviewed and analyzed. Results A total of 811 articles were identified through the PICO question and search strategy. Detailed review of the abstracts and articles resulted in further item reduction, and 46 articles were included for full‐text review. A total of 42 articles were then selected for inclusion in the systematic review. The identified articles included two level I and 20 level II studies. In addition, 15 level IV, one gray literature, and four previous systematic reviews with meta‐analyses were also used in the study. The extracted data from the included studies demonstrated heterogeneity that prevented quantitative assessment, and only one level II study directly compared tilted and axially placed implants. Assessment of the descriptive data demonstrated no differences in implant survival, marginal bone loss, prosthesis survival, or patient‐reported outcome measures (PROMs) whether implants are placed axially or with intentional inclination of the coronal aspect of the implant toward the distal aspect of edentulous jaws. Conclusions Based upon the systematic review of the literature, an analysis of the descriptive data suggested no differences in clinical performance between implants that are placed in an axial position relative to the residual alveolar ridge when compared with implants that are intentionally tilted toward the distal aspect of edentulous jaws.
Comparison of surface characteristics of denture base resin materials with two surface treatment protocols and simulated brushing
(Wiley, 2023) Alouthah, Hesham; Lippert, Frank; Yang, Chao-Chieh; Levon, John A.; Lin, Wei-Shao; Prosthodontics, School of Dentistry
Purpose To investigate the effects of 4 denture base materials, 2 surface treatment protocols, and simulated brushing (SB) on the surface hardness, surface roughness, surface gloss, and the surface loss of denture base materials. Materials and Methods Four denture base resin material groups (compression-molded, injection-molded, 3D-printed, and milled) with two different surface treatment protocols (polished and glazed) were utilized in this study. A total of 80 samples (n = 10) were evaluated for surface hardness (Vickers) before SB. SB was performed for each sample (custom-built V8 cross brushing machine, 50,000 reciprocal strokes). Surface roughness (Ra) was measured before and after SB with a non-contact optical profilometer. Surface gloss was performed using a glossmeter to determine changes in surface reflectivity of the specimens before and after SB. Surface loss (wear resistance) was measured after SB using optical profilometry. The effects of material, surface treatment, and SB on all surface characteristics were examined with two-way and three-way analysis of variance models (ANOVA) (α = 0.05). Results The polished compression-molded group had significantly higher surface hardness than all other groups. The protective glaze coating significantly increased the surface hardness for all groups (P < 0.001). SB increased the surface roughness of all groups regardless of surface treatments (P < 0.001). The increase in surface roughness after SB was significantly higher with polished surface treatment than with a glazed surface treatment in all groups (P < 0.001). Surface gloss was significantly higher with the glazed surface treatment than with the polished surface treatment for all denture base materials (P < 0.001). After SB, milled denture base material showed the highest, and 3D-printed material showed the second highest surface gloss compared to the other groups (P < 0.001), regardless of surface treatment. In all materials tested, surface glaze significantly decreased surface loss (P < 0.001). With the glaze surface treatment, compression-molded denture base material had significantly less surface loss (more surface gain) than other materials, while with the polished surface treatment, 3D-printed denture base material had the least surface loss when compared with other groups. Conclusions A single layer of nano-filled, light-polymerizing protective glaze coating has displayed potential for enhancing the longevity of denture base materials, as evidenced by increased hardness and wear resistance. Following simulated brushing, the milled denture material exhibited the highest surface gloss and lowest surface roughness among all groups, regardless of the surface treatment protocol. This indicates that milled denture base material possesses favorable surface properties and may serve as a viable alternative to traditional denture base materials.

Browse

Browsing Department of Prosthodontics by Title

Results Per Page

Sort Options