Browsing by Author "Cho, Sopanis D."
Now showing 1 - 6 of 6
Results Per Page
Sort Options
Item Effect of full-contour Y-TZP zirconia surface roughness on wear of glass-based ceramics(2011) Luangruangrong, Palika, 1983-; Bottino, Marco C.; Hara, Anderson T.; Cochran, Michael A.; Cho, Sopanis D.; Cook, N. BlaineThe use of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP), normally employed as a framework for all-ceramic restorations, has now started to be used without any veneering ceramics in patients with parafunctional activities. The aims of this study were to evaluate the influence of Y-TZP surface roughness on the wear behavior (volume/height loss) against glass-based ceramics (i.e., IPS Empress CAD and IPS e.max CAD, Ivoclar-Vivadent). Thirty-two Y-TZP full-contour zirconia (Ardent®) sliders (ϕ=2 mm, 1.5 mm in height) were milled in a CAD/CAM unit and sintered according to the manufacturer instructions. Sliders were embedded in brass holders using acrylic resin and then randomly allocated into 2 groups according to the surface treatment (n=16): G1-as-machined and G2-glazed (Diazir®). Empress and e.max antagonists were cut into tabs (13×13×2 mm) wet-finished and also embedded in brass holders. Two-body pin-on-disc wear testing was performed at 1.2 Hz for 25,000 cycles under a 3-kg load. Non-contact profilometry was used to measure antagonist height (μm) and volume loss (mm3). Qualitative data of the testing surfaces and wear tracks were obtained using SEM. Statistics were performed using one- and two-way ANOVAs (α=0.05). The results indicated that G1 yielded significantly higher mean roughness values (Ra=0.83 μm, Rq=1.09 μm) than G2 (Ra=0.53 μm, Rq=0.78 μm). Regarding antagonist loss, G1 caused significantly less antagonist mean height and volume loss (68.4 μm, 7.6 mm3) for Empress than G2 (84.9 μm, 9.9 mm3) while no significant differences were found for e.max. Moreover, Empress significantly showed lower mean height and volume loss than e.max (p<0.0001). SEM data revealed morphological differences on wear characteristics between the two ceramics against Y-TZP. Within the limitations of this study, e.max wear was not affected by Y-TZP surface roughness. However, Empress wear was greater when opposing glazed Y-TZP. Overall, based on our findings, surface glazing on full-contour Y-TZP did not minimize glass-ceramic antagonist wear when compared with as-machined group.Item Effect of surface conditioning methods on repair bond strength of microhybrid resin matrix composite(2010) Rajitrangson, Phitakphong, 1982-; Cochran, Michael A. (Michael Alan), 1944-; Cho, Sopanis D.; Gonzalez-Cabezas, Carlos, 1966-; Matis, Bruce A.; Platt, Jeffrey A., 1958-Repair is an alternative treatment option in many cases to replacement of resin matrix composite restoration. However, aged resin matrix composites have a limited number of carbon-carbon double bonds to adhere to a new layer of rein. Therefore, surface treatments of the aged resin matrix composite surface prior to repairing could improve the repair bond strength. The objectives of this study were to: 1) To evaluate various surface treatments on shear bond strength of repair between aged and new microhybrid resin matrix composite, and 2) To assess the influence of applying a silane coupling agent after surface treatments. Eighty disk-shaped resin matrix composite specimens were fabricated and thermocycled 5000 times prior to surface treatment. Specimens were randomly assigned to one of the three surface treatments (n = 20): 1) Airborne abrasion with 50 μm aluminum oxide, 2) Tribochemical silica coating (CoJet), or 3) Er,Cr:YSGG laser and control group (n = 20). Specimens were cleaned with 35-percent phosphoric acid, rinsed, and dried. Each group was assigned into two subgroups (n =10): a) no silanization, and b) with silanization. Adhesive agent was applied and new resin matrix composite was bonded to each conditioned surface. Bond strength was evaluated by shear test. Data were analyzed with a two-way ANOVA model. The interaction between conditioning and silanization was significant(p = 0.0163), indicating that comparisons of silanization must be evaluated for each conditioning method, and that comparisons of conditioning methods must be evaluated separately with and without silanization. Airborne particle abrasion showed significantly higher repair bond strength than Er,Cr:YSGG laser without silanization (p < 0.0001) and with silanization(p = 0.0002), and higher repair bond strength than the control without silanization (p < 0.00001) and with silanization (p < 0.00001). Airborne particle abrasion did not have significantly different in repair bond strength than Tribosilica coating without silanization (p = 0.70) or with silanization (p = 0.33). Tribosilica coating had significantly higher repair bond strength than Er,CR:YSGG laser without silanization (p < 0.0001) and with silanization (p < 0.0001), and significantly higher repair bond strength than control without silanization (p < 0.0001), but not with silanization (p =0.16). Er,CR:YSGG laser and control did not have significantly different repair bond strength without silanization (p = 1.00) or with silanization (p = 0.11). There was no effect of silanization on repair bond strength overall (p = 0.34) for any of the surface conditioning methods (p = 0.76 for airborne particle abrasion; p = 0.39 for tribosilica coating; p = 1.00 for Er,Cr:YSGG laser, or p = 0.39 for control). Airborne particle abrasion with 50-μm aluminum oxide particle and tribochemical silica coating followed by the application of bonding agent provided the highest shear bond strength values, suggesting that they might be adequate methods to improve the quality of the repairs of resin-matrix composites.Item Effect of surface treatments on microtensile bond strength of repaired aged silorane resin composite(2010) Palasuk, Jadesada; Platt, Jeffrey A., 1958-; Levon, John A.; Brown, David T.; Hovijitra, Suteera, 1944-; Cho, Sopanis D.Background: A silorane based resin composite, Filtek LS restorative, has been introduced to overcome the polymerization shrinkage of the methacrylate based resin composite. The repair of resin composite may hold clinical advantages. Currently, there is no available information regarding the repair potential of silorane resin composite with either silorane or methacrylate based resin composite. Objectives: The purpose of this study was to compare the repaired microtensile bond strength of aged silorane resin composite using different surface treatments and either silorane or methacrylate based resin composite. Methods: One hundred and eight silorane resin composite blocks (Filtek LS) were fabricated and aged by thermocycling between 8oC and 48oC (5000 cycles). A control (solid resin composite) and four surface treatment groups (no treatment, acid treatment, aluminum oxide sandblasting and diamond bur abrasion) were tested. Each treatment group was randomly divided in half and repaired with either silorane resin composite (LS adhesive) or methacrylate based resin composite (Filtek Z250/Single Bond Plus). Specimens were 12 blocks and 108 beams per group. After 24 hours in 37oC distilled water, microtensile bond strength testing was performed using a non-trimming technique. Fracture surfaces were examined using an optical microscopy (20X) to determine failure mode. Data was analyzed using Weibull-distribution survival analysis. Results: Aluminum oxide sandblasting followed by silorane or methacrylate based resin composite and acid treatment with methacrylate based resin composite provided insignificant differences from the control (p>0.05). All other groups were significantly lower than the control. Failure was primarily adhesive in all groups. Conclusion: Aluminum oxide sandblasting produced comparable microtensile bond strength compared to the cohesive strength of silorane resin composite. After aluminum oxide sandblasting, aged silorane resin composite can be repaired with either silorane resin composite with LS system adhesive or methacrylate based resin composite with methacrylate based dentin adhesive.Item Kalirin : novel role in osteocyte function(2013) Wayakanon, Kornchanok; Bruzzaniti, Angela; Windsor, Lester Jack; Chu, Tien-Min Gabriel; Cho, Sopanis D.; Cook, Norman Blaine, 1954-Communication between bone cells is important for the maintenance of bone mass. Although osteocytes are deeply embedded within the mineralized matrix, they are essential for the regulation of osteoblast and osteoclast functions. However, the intracellular proteins that control the morphology and function of osteocytes, and their ability to communicate with other bone cells are still unknown. Kalirin is a novel multi-domain GTP exchange factor (GEF) protein that activates the RhoGTPases. Recently, we found that 14 week old female Kalirin knockout (Kal-KO) mice exhibit a 45% decrease in trabecular bone density and have significantly lower cortical area, perimeter, thickness and polar cross-sectional moment of inertia (-12.6%, -7.2%, -7.6% and -21.9%, respectively) than WT mice. Kalirin was found to be expressed in osteoclasts and osteoblasts but its expression and function in osteocytes is currently unclear. We examined the role of Kalirin on the morphology and function of osteocytes. Primary osteocytes were isolated by sequential collagenase digestions from long bones (femurs and tibias) of 10-week old WT and Kal-KO mice. Immunofluorescent staining revealed Kalirin was localized to the perinuclear region of primary osteocytes and MLO-Y4 cells, and was detected along the cytoplasmic processes of primary osteocytes. We also examined primary osteocytes isolated from the long bones of Kal-KO and WT mice for changes in the length and number of cytoplasmic processes. Kal-KO osteocytes were found to express significantly fewer cytoplasmic processes per cell (3.3±0.21) than WT osteocytes (4.7±0.3). In addition, the cytoplasmic processes of Kal-KO osteocytes were shorter (79.5±4.6 µm) than those observed for WT osteocytes (85.4±3.6 µm) (p <0.01). Quantitative PCR revealed the expression of mRNA for the three major Kalirin isoforms (Kal-7, Kal-9, Kal-12) in primary osteocytes and in MLO-Y4 cells. Moreover, the mRNA levels of osteoprotegerin (OPG) and SOST, which are important for controlling osteoclast differentiation and Wnt signaling leading to bone formation, respectively, were reduced in Kal-KO osteocytes. Next, the role of Kalirin in osteocyte morphology and function was further examined. Treatment of MLO-Y4 cells for 5 days with nerve growth factor, which is known to activate Kalirin in neurons, or over-expression of the Ser-Thr kinase domain of Kal-12, promoted cytoplasmic process elongation and upregulated phosphorylated ERK and RhoA levels. Together, these results suggest that Kalirin controls osteocyte morphology and function in part by regulating cytoskeletal remodeling and the activity of ERK and RhoA. Furthermore, Kalirin may control the bone remodeling cycle by regulating osteocyte signaling to osteoclasts and osteoblasts.Item A laboratory evaluation of detail reproduction, contact angle, and tear strength of three elastomeric impression materials(2011) Sun, Ming; Platt, Jeffrey A., 1958-; Levon, John A.; Cho, Sopanis D.; Paez de Mendoza, Carmen Y.; Brown, David T.Fabrications of desirable fixed or removable dental prostheses depend upon accurate casts or dies. Recently, the most frequently used impression materials have been polyether (PE) and polyvinyl siloxane (PVS). However, both have their limitations: PVS is inherently hydrophobic, and PE is rigid. In order to take advantage of the desirable qualities of both PVS and PE impression materials, a new generation of impression material is being developed called vinyl polyether silicone (VPES, GC). The purpose of the present study was to compare the properties of hydrophilic PVS, PE, and VPES in regard to surface detail reproduction, contact angle, and tear strength. The hypotheses to be tested were: 1) VPES will show a significant superiority insurface detail reproduction compared with PVS and PE impression materials; 2) VPES will show a significant superiority in wettability compared with PVS and PE impression materials; 3) VPES will show a significant superiority in tear strength compared with PVS and PE impression materials. In order to test the surface detail reproduction, impressions were made of stainless steel dies with a parallel series of 15 different width lines on the surface and tested under dry and moist conditions. The wettability was assessed by contact angles of saturated CaSO4 aqueous solution drops on flat impression surfaces. A trouser tear test was employed to test the tear strength. The trouser-shaped specimens were prepared and tested in the Instron Universal Testing Machine. The data were analyzed by one-way ANOVA and Pearson‘s Chi square, (p < 0.05). All the materials showed better detail reproduction under the dry conditions than the moist conditions. There were no differences between the three materials in detail reproduction when impressing under either moist conditions or dry conditions. All the materials showed good wettability in the contact angle test. PVS rendered a contact angle as low as 34.19º. The contact angle of VPES was 44.84º, which was lower than 54.76º for PE. In the tear strength test, PE showed nearly two time higher tear strength than the other two impression materials. VPES showed slightly lower tear strength than PVS. The tear strength of the three materials tested in increasing order was VPES, PVS, PE. VPES showed comparable detail reproduction to PVS and PE and better wettability than PE, but showed the lowest tear strength compared with PE and PVS.Item Nutritional Assessment of Denture Wearers Using Matched Electronic Dental-Health Record Data(Wiley, 2022-08) Felix Gomez, Grace Gomez; Cho, Sopanis D.; Varghese, Roshan; Rajendran, Divya; Eckert, George J.; Bhamidipalli, Sruthi Surya; Gonzalez, Theresa; Khan, Babar Ali; Thyvalikakath, Thankam Paul; Cariology, Operative Dentistry and Dental Public Health, School of DentistryPurpose To assess the nutritional profile of denture wearers through a retrospective cohort study using nutritional biomarkers from matched electronic dental and health record (EDR-EHR) data. Materials and methods The case group (denture wearers) included matched EDR-EHR data of patients who received removable partial, complete, and implant-supported prosthodontic treatments between January 1, 2010 and December 31, 2018, study time. The control (nondenture wearers) group did not have recorded denture treatments and included patient records within 1 year of the denture index date (first date of case patients’ receiving complete or partial denture) of the matching cases. The qualified patients’ EDR were matched with their EHR based on the availability of laboratory reports within 2 years of receiving the dentures (index date). Nutritional biomarkers were selected from laboratory reports for complete blood count, comprehensive and basic metabolic profile, lipid, and thyroid panels. Summary statistics were performed, and general linear mixed effect models were used to evaluate the rate of change over time (slope) of nutritional biomarkers before and after the index date. Likelihood ratio tests were performed to determine the differences between dentures and controls. Results The final cohort included 10,481 matched EDR-EHR data with 3,519 denture wearers and 6,962 controls that contained laboratory results within the study time. The denture wearers’ mean age was 57 ±10 years and the control group was 56 ±10 years with 55% females in both groups. Pre-post analysis among denture wearers revealed decreased serum albumin (p = 0.002), calcium (p = 0.039), creatinine (p < 0.001) during the post-index time. Hemoglobin (Hb) was higher pre-index, and was decreasing during the time period but did not change post-index (p < 0.001). Among denture wearers, completely edentulous patients had a significant decrease in serum albumin, creatinine, blood urea nitrogen (BUN), but increased estimated glomerular filtration rate (eGFR). In partially edentulous patients, total cholesterol decreased (p = 0.018) and TSH (p = 0.004), BUN (p < 0.001) increased post-index. Patients edentulous in either upper or lower arch had decreased BUN and eGFR during post-index. Compared to controls, denture wearers showed decreased serum albumin and protein (p = 0.008), serum calcium (p = 0.001), and controls showed increased Hb (p = 0.035) during post-index. Conclusions The study results indicate nutritional biomarker variations among denture wearers suggesting a risk for undernutrition and the potential of using selected nutritional biomarkers to monitor nutritional profile.