Design and Fabrication of High Capacity Lithium-Ion Batteries using Electro-Spun Graphene Modified Vanadium Pentoxide Cathodes

dc.contributor.advisorAgarwal, Mangilal
dc.contributor.authorAhmadian, Amirhossein
dc.contributor.otherXie, Jian
dc.contributor.otherDalir, Hamid
dc.date.accessioned2019-07-29T11:46:26Z
dc.date.available2019-07-29T11:46:26Z
dc.date.issued2019-08
dc.degree.dateAugust 2019en_US
dc.degree.disciplineMechanical Engineeringen
dc.degree.grantorPurdue Universityen_US
dc.degree.levelM.S.M.E.en_US
dc.descriptionIndiana University-Purdue University Indianapolis (IUPUI)en_US
dc.description.abstractElectrospinning has gained immense interests in recent years due to its potential application in various fields, including energy storage application. The V2O5/GO as a layered crystal structure has been demonstrated to fabricate nanofibers with diameters within a range of ~300nm through electrospinning technique. The porous, hollow, and interconnected nanostructures were produced by electrospinning formed by polymers such as Polyvinylpyrrolidone (PVP) and Polyvinyl alcohol (PVA), separately, as solvent polymers with electrospinning technique. In this study, we investigated the synthesis of a graphene-modified nanostructured V2O5 through modified sol-gel method and electrospinning of V2O5/GO hybrid. Electrochemical characterization was performed by utilizing Arbin Battery cycler, Field Emission Scanning Electron Microscopy (FESEM), X-ray powder diffraction (XRD), Thermogravimetric analysis (TGA), Mercury Porosimetry, and BET surface area measurement. As compared to the other conventional fabrication methods, our optimized sol-gel method, followed by the electrospinning of the cathode material achieved a high initial capacity of 342 mAh/g at a high current density of 0.5C (171 mA/g) and the capacity retention of 80% after 20 cycles. Also, the prepared sol-gel method outperforms the pure V2O5 cathode material, by obtaining the capacity almost two times higher. The results of this study showed that post-synthesis treatment of cathode material plays a prominent role in electrochemical performance of the nanostructured vanadium oxides. By controlling the annealing and drying steps, and time, a small amount of pyrolysis carbon can be retained, which improves the conductivity of the V2O5 nanorods. Also, controlled post-synthesis helped us to prevent aggregation of electro-spun twisted nanostructured fibers which deteriorates the lithium diffusion process during charge/discharge of batteries.en_US
dc.identifier.doi10.25394/PGS.9037004
dc.identifier.urihttps://hdl.handle.net/1805/19981
dc.identifier.urihttp://dx.doi.org/10.7912/C2/2708
dc.language.isoen_USen_US
dc.rightsAttribution-NonCommercial 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc/3.0/us/*
dc.subjectLithium-ion batteriesen_US
dc.subjectNanotechnologyen_US
dc.subjectNanomaterialsen_US
dc.subjectMaterial scienceen_US
dc.subjectElectrospinningen_US
dc.subjectGrapheneen_US
dc.subjectElectrochemistryen_US
dc.titleDesign and Fabrication of High Capacity Lithium-Ion Batteries using Electro-Spun Graphene Modified Vanadium Pentoxide Cathodesen_US
dc.typeThesisen
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Amirhossein Ahmadian_Li-ion Batteries_electrospun V2O5GO.pdf
Size:
28.64 MB
Format:
Adobe Portable Document Format
Description:
Thesis
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.99 KB
Format:
Item-specific license agreed upon to submission
Description: