An in vitro comparison of working length accuracy between a digital system and conventional film when vertical angulation of the object is variable

Abstract

Accurate determination of working length during endodontic therapy is critical in achieving a predictable and successful outcome. Working length is determined by the use of electronic apex locators, tactile perception, knowledge of average tooth lengths and dental radiography. Due to the increasing use of digital radiography in clinical practice, a comparison with conventional film in working length determination is justified. The purpose of this study is to determine if there is a difference between Schick digital radiography and Kodak Ultra-speed film in the accurate determination of working lengths when vertical angulation of the object is variable. Twelve teeth with #15 K-flex files at varying known lengths from the anatomical apex were mounted in a resin-plaster mix to simulate bone density. A mounting jig for the standardization of projection geometries allowed for exact changes in vertical angulation as it related to the object (tooth) and the film/sensor. Each tooth was imaged using Schick CDR and Kodak Ultra-speed film at varying angles with a consistent source-film distance and exposure time. Four dental professionals examined the images and films independently and measured the distance from the tip of the file to radiographic apex and recorded their results. The error in working length was calculated as the observed value minus the known working length for each tooth type. A mixed-effects, full-factorial analysis of variance (ANOVA) model was used to model the error in working length. Included in the ANOVA model were fixed effects for type of image, vertical angulation, and the interaction of angle and film type. Tooth type and examiner were included in the model as random effects assuming a compound symmetry covariance structure. The repeatability of each examiner, for each film type, was assessed by estimating the intra-class correlation coefficient (ICC). The ICC was determined when 12 randomly selected images and radiographs were reevaluated 10 days after initial measurements. The repeatability of each examiner for Schick CDR was good with ICCs ranging from 0.67 to 1.0. Repeatability for the conventional film was poor with ICCs varying from -0.29 to 0.55. We found the error in the working length was not significantly different between film types (p = 0.402). After adjusting for angle, we found that error in the working length from the digital image was only 0.02 mm greater (95-percent CI: -0.03, 0.06) than the conventional film. Furthermore, there was not a significant difference among the angles (p = 0.246) nor in the interaction of image type with angle (p = 0.149). Based on the results of our study, we conclude that there is not a statistically significant difference in determining working length between Schick CDR and Kodak Ektaspeed film when vertical angulation is modified.