- Browse by Subject
Browsing by Subject "LSPR"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Fabrication of Lspr-Based Multiplexed and High-Throughput Biosensor Platforms for Cancer and Sars-Cov-2 Diagnosis(2022-05) Masterson, Adrianna Nichole; Sardar, Rajesh; Long, Eric; Manicke, Nicholas; Naumann, ChristophDesigning and developing a diagnostic technology that is capable of highly sensitive and specific, multiplexed, high-throughput, and quantitative biomarker assays for disease diagnosis and progression is of the upmost importance in modern medicine and patient care. Current diagnostic assays capable of multiplexed and high-throughput analysis include mass spectrometry, electrochemistry, polymerase chain reaction (PCR), and fluorescence-based techniques, however, these techniques suffer from a lack in sensitivity, false responses, or extensive sample processing that are detrimental to clinical diagnostics. To overcome these sensitivity challenges, the field of nanoplasmonics has become utilized when developing diagnostic assays. Plasmonic-based diagnostic tests utilize the unique optical, chemical, and physical property of nanoparticles to increase the sensitivity of the assay. In this dissertation, novel diagnostic platforms that utilize nanoparticles and their localized surface plasmon resonance (LSPR) property will be introduced. LSPR is an optical property in noble metallic nanoparticles that is referred to as the collective oscillation of free electrons upon light irradiation. It is highly dependent on the shape, size, and dielectric constant (refractive index) of the surrounding medium of the nanoparticle and LSPR sensing is based on a change in these properties. In this dissertation, the LSPR property is utilized to fabricate nanoplasmonic-based diagnostic platforms that are capable of multiplexed and high-throughput biomarker assays, with high sensitivity and specificity. The work presented in this dissertation is presented as six chapters, (1) Introduction. (2) Methods, (3) Fabrication of a LSPR-based multiplexed and high-throughput biosensor platform and its application in performing microRNA assays for the diagnosis of bladder cancer. In this chapter, the advancement of single-plex solid state LSPR-based biosensors into a multiplexed and high-throughput diagnostic biosensor platform is reported for the first time. The diagnostic biosensor platform is first fabricated utilizing different gold nanoparticles (spherical nanoparticles, nanorods, and triangular nanoprisms), and then with the gold triangular nanoprisms as the nanoparticle of choice, microRNA assays were performed. The developed biosensor platform is capable of assaying five different types of microRNAs simultaneously at an attomolar limit of detection. Additionally, five microRNA were assayed in 20-bladder cancer patient plasma samples. (4) Development/optimization of the biosensor platform presented in Chapter 3 for the detection of COVID-19 biomarkers. In this chapter, the biosensor platform utilized in Chapter 3 was designed to assay 10 different COVID-19 specific biomarkers from three classes (six viral nucleic acid gene sequences, two spike protein subunits, and two antibodies) with limit of detections in the attomolar range and with high specificity. The high-throughput capability of the biosensor platform was advanced, with the platform performing analysis of a single biomarker in 92 patient samples simultaneously. Additionally, the biomarker platform was utilized to assay all 10 biomarkers in a total of 80 COVID-19 patient samples. (5) Further optimization of the biosensor platform for the development of a highly specific antibody detection test for COVID-19. During the COVID-19 pandemic, knowledge was gained on the specificity of antibodies produced against COVID-19. In this chapter, that knowledge was applied towards the optimization of the biosensor platform presented in Chapter 4 in order to assay SARS-CoV-2 neutralizing antibody IgG. The optimization of the biosensor platform included the size of the gold triangular nanoprisms and the receptor molecule of choice. The biosensor platform assayed this highly specific COVID-19 IgG antibody with a limit of detection as low as 30.0 attomolar with high specificity and no cross reactivity. Additionally, as a proof of concept, the biosensor platform was utilized in a high-throughput format to assay SARS-CoV-2 IgG in a large cohort of 121 COVID-19 patient samples simultaneously. (6) Advancement of the biosensor platform from a 96-well plate to a 384-well plate and its application in assaying microRNA for early diagnosis of pancreatic cancer. In this chapter, the high-throughput capabilities of the biosensor platform presented in Chapters 3-5 was expanded by increasing the sensor amount in one platform from 92 to 359. The 384-well plate biosensor platform was designed, optimized, and utilized to perform microRNA assays for early-stage pancreatic cancer diagnosis. The optimization of the biosensor platform included the manipulation of LSPR-based parameters and the -ssDNA receptor molecule in order to obtain low limit of detections (high sensitivity). Additionally, the biosensor platform assayed two microRNA in a large cohort (n=110) of pancreatic cancer and chronic pancreatitis patient samples.Item Surface Chemistry Control of 2D Nanomaterial Morphologies, Optoelectronic Responses, and Physicochemical Properties(2022-05) Lee, Jacob T.; Sardar, Rajesh; Deiss, Frédérique; Long, Eric; Webb, IanThe field of two-dimensional (2D) nanomaterials first began in earnest with the discovery of graphene in 2004 due to their unique shape-dependent optical, electronic, and mechanical properties. These properties arise due to their one-dimensional confinement and are further influenced by the elemental composition of the inorganic crystal lattice. There has been an intense focus on developing new compositions of 2D nanomaterials to take advantage of their intrinsic beneficial properties in a variety of applications including catalysis, energy storage and harvesting, sensing, and polymer nanocomposites. However, compared to the field of bulk materials, the influence of surface chemistry on 2D nanomaterials is still underdeveloped. 2D nanomaterials are considered an “all-surface” atomic structure with heights of a single to few layers of atoms. The synthetic methods used to produce 2D materials include bottom-up colloidal methods and top-down exfoliation related techniques. Both cases result in poorly controlled surface chemistry with many undercoordinated surface atoms and/or undesirable molecules bound to the surface. Considering the importance surfaces play in most applications (i.e., catalysis and polymer processing) it is imperative to better understand how to manipulate the surface of 2D nanomaterials to unlock their full technological potential. Through a focus of the ligand-surface atom bonding in addition to the overall ligand structure we highlight the ability to direct morphological outcomes in lead free halide perovskites, maximize optoelectronic responses in substoichiometric tungsten oxide, and alter physicochemical properties titanium carbide MXenes. The careful control of precursor materials including poly(ethylene glycol) (PEG) surface ligands during the synthesis of bismuth halide perovskites resulted in the formation of 2D quasi-Ruddlesden-Popper phase nanomaterials. Through small angle X-ray scattering (SAXS) and in conjunction with X-ray photoelectron spectroscopy (XPS) we were able to conclude that an in-situ formation of an amino functional group on our PEG-amine ligand was inserted into the perovskite crystal lattice enabling 2D morphology formation. Additionally, through UV-vis absorption and ultraviolet photoelectron spectroscopies we were able to develop a complete electronic band structure of materials containing varying halides (i.e., Cl, Br, and I). Furthermore, through the increased solubility profile of the PEG ligands we observed solvent controlled assemblies of varying mesostructures. We developed an ex-situ ligand treatment to manipulate the localized surface plasmon resonance (LSPR) response of anion vacancy doped tungsten oxide (WO3-x) nanoplatelets (NPLs). Upon ligand treatment to alter the surface passivating ligand from carboxylic acid containing myristic acid (MA) to tetradecylphosphonic acid (TDPA) we observed a >100 nm blue shift in the LSPR response. Using Fourier transform infrared (FTIR) and Raman spectroscopies in conjunction with DFT calculated Raman spectra we were able to conclude this shift was due to the formation of tridentate phosphonate bonds on the NPLs surface. Phosphonate bonding allows for an increase in surface passivation per ligand decreasing surface trapped electrons. These previously trapped electrons were then able to participate as free electrons in the LSPR response. Electron paramagnetic spectroscopy (EPR) further supported this decrease in surface traps through a decrease and shift of the EPR signal related to metal oxide surface trapped electrons. Lastly, using our knowledge of PEG ligands we were able to modify esterification chemistry to covalently attach PEG ligands to a MXene surface. The successful formation of an ester bond between a carboxylic acid containing PEG ligand and hydroxyl terminating group on the MXene surface was supported by FTIR spectroscopy and thermogravimetric analysis. The attachment of PEG resulted in a drastic change in the hydrophilicity of the MXene surface. Where MXenes were previously only processed in extremely polar solvents the PEG attachment allowed for high dispersibility in a wide range of polar and non-polar organic solvents, effectively increasing their processability. Further, this chemistry was modified to include an additional functional group on the PEG ligand to increase the valency of the post-modification MXene nanoflakes. Overall, work presented in this dissertation represents the development and application of surface chemistry to relatively new 2D nanomaterials. We believe our work significantly increases the knowledge of 2D halide perovskite formation, manipulation of LSPR active metal oxide materials, and the future processing of MXene materials.