Browsing by Subject "Fibrin"

Now showing 1 - 6 of 6
  • Thumbnail Image
    Item
    C-reactive protein and fibrin clot strength measured by thrombelastography after coronary stenting
    (Wolters Kluwer, 2013) Kreutz, Rolf P.; Owens, Janelle; Breall, Jeffrey A.; Lu, Deshun; von der Lohe, Elisabeth; Bolad, Islam; Sinha, Anjan; Flockhart, David A.; Medicine, School of Medicine
    Inflammation is implicated in the progression of coronary artery disease and the molecular processes of inflammation and thrombosis are closely intertwined. Elevated levels of C-reactive protein (CRP) have been associated with an elevated risk of adverse ischaemic events after coronary stenting and hypercoagulability. Heightened whole blood clot strength measured by thrombelastography (TEG) has been associated with adverse ischaemic events after stenting. We intended to examine the relationship of CRP to plasma fibrin clot strength in patients after coronary stenting. Plasma fibrin clot strength was measured by TEG in 54 patients 16-24 h after undergoing elective percutaneous coronary intervention (PCI). Coagulation was induced in citrated plasma by addition of kaolin and CaCl2. Plasma levels of CRP and fibrinogen were measured by enzyme-linked immunoassay. Increasing quartiles of CRP were associated with increasing levels of maximal plasma fibrin clot strength measured by TEG (P < 0.001) and increasing BMI (P = 0.04). Patients in the highest quartile of CRP had significantly higher maximal fibrin clot strength (G) than the patients in the lowest quartile (G: 3438 ± 623 vs. 2184 ± 576 dyn/cm, P < 0.0001). Fibrinogen concentration was not significantly different across quartiles of CRP (P = 0.97). Patients with established coronary artery disease undergoing coronary stenting who have elevated CRP after PCI exhibit heightened maximal plasma fibrin clot strength as compared with those with low CRP. Thrombotic risk associated with elevated CRP may be linked to procoagulant changes and high tensile fibrin clot strength independent of fibrinogen concentration.
  • Thumbnail Image
    Item
    Compression-induced structural and mechanical changes of fibrin-collagen composites
    (Elsevier, 2017-07) Kim, O. V.; Litvinov, R. I.; Chen, J.; Chen, D. Z.; Weisel, J.W.; Alber, M. S.; Medicine, School of Medicine
    Fibrin and collagen as well as their combinations play an important biological role in tissue regeneration and are widely employed in surgery as fleeces or sealants and in bioengineering as tissue scaffolds. Earlier studies demonstrated that fibrin-collagen composite networks displayed improved tensile mechanical properties compared to the isolated protein matrices. Unlike previous studies, here unconfined compression was applied to a fibrin-collagen filamentous polymer composite matrix to study its structural and mechanical responses to compressive deformation. Combining collagen with fibrin resulted in formation of a composite hydrogel exhibiting synergistic mechanical properties compared to the isolated fibrin and collagen matrices. Specifically, the composite matrix revealed a one order of magnitude increase in the shear storage modulus at compressive strains>0.8 in response to compression compared to the mechanical features of individual components. These material enhancements were attributed to the observed structural alterations, such as network density changes, an increase in connectivity along with criss-crossing, and bundling of fibers. In addition, the compressed composite collagen/fibrin networks revealed a non-linear transformation of their viscoelastic properties with softening and stiffening regimes. These transitions were shown to depend on protein concentrations. Namely, a decrease in protein content drastically affected the mechanical response of the networks to compression by shifting the onset of stiffening to higher degrees of compression. Since both natural and artificially composed extracellular matrices experience compression in various (patho)physiological conditions, our results provide new insights into the structural biomechanics of the polymeric composite matrix that can help to create fibrin-collagen sealants, sponges, and tissue scaffolds with tunable and predictable mechanical properties.
  • Thumbnail Image
    Item
    Effect of Chandler loop shear and tubing size on thrombus architecture
    (Springer, 2023-05-12) Zeng, Ziqian; Chakravarthula, Tanmaye Nallan; Christodoulides, Alexei; Hall, Abigail; Alves, Nathan J.; Emergency Medicine, School of Medicine
    Thrombosis can lead to a wide variety of life-threatening circumstances. As current thrombolytic drug screening models often poorly predict drug profiles, leading to failure of thrombolytic therapy or clinical translation, more representative clot substrates are necessary for drug evaluation. Utilizing a Chandler loop device to form clot analogs at high shear has gained popularity in stroke societies. However, shear-dependent clot microstructure has not been fully addressed and low shear conditions are often overlooked. We herein characterized the impact of wall shear rate (126 to 951 s-1) on clot properties in the Chandler loop. Different revolutions (20-60) per minute and tubing sizes (3.2 to 7.9 mm) were employed to create different sized clots to mimic various thrombosis applications. Increased shear resulted in decreased RBC counts (76.9 ± 4.3% to 17.6 ± 0.9%) and increased fibrin (10 to 60%) based on clot histology. Increased fibrin sheet morphology and platelet aggregates were observed at higher shear under scanning electron microscope. These results show the significant impact of shear and tubing size on resulting clot properties and demonstrate the capability of forming a variety of reproducible in-vivo-like clot analogs in the Chandler loop device controlling for simple parameters to tune clot characteristics.
  • Thumbnail Image
    Item
    Enhanced Viability of Endothelial Colony Forming Cells in Fibrin Microbeads for Sensor Vascularization
    (MDPI AG, 2015-09-18) Gandhi, Jarel K.; Zivkovic, Lada; Fisher, John P.; Yoder, Mervin C.; Brey, Eric M.; Department of Pediatrics, School of Medicine
    Enhanced vascularization at sensor interfaces can improve long-term function. Fibrin, a natural polymer, has shown promise as a biomaterial for sensor coating due to its ability to sustain endothelial cell growth and promote local vascularization. However, the culture of cells, particularly endothelial cells (EC), within 3D scaffolds for more than a few days is challenging due to rapid loss of EC viability. In this manuscript, a robust method for developing fibrin microbead scaffolds for long-term culture of encapsulated ECs is described. Fibrin microbeads are formed using sodium alginate as a structural template. The size, swelling and structural properties of the microbeads were varied with needle gauge and composition and concentration of the pre-gel solution. Endothelial colony-forming cells (ECFCs) were suspended in the fibrin beads and cultured within a perfusion bioreactor system. The perfusion bioreactor enhanced ECFCs viability and genome stability in fibrin beads relative to static culture. Perfusion bioreactors enable 3D culture of ECs within fibrin beads for potential application as a sensor coating.
  • Thumbnail Image
    Item
    Fibrin Networks Regulate Protein Transport during Thrombus Development
    (Public Library of Science, 2013) Kim, Oleg V.; Xu, Zhiliang; Rosen, Elliot D.; Alber, Mark S.; Medical and Molecular Genetics, School of Medicine
    Thromboembolic disease is a leading cause of morbidity and mortality worldwide. In the last several years there have been a number of studies attempting to identify mechanisms that stop thrombus growth. This paper identifies a novel mechanism related to formation of a fibrin cap. In particular, protein transport through a fibrin network, an important component of a thrombus, was studied by integrating experiments with model simulations. The network permeability and the protein diffusivity were shown to be important factors determining the transport of proteins through the fibrin network. Our previous in vivo studies in mice have shown that stabilized non-occluding thrombi are covered by a fibrin network ('fibrin cap'). Model simulations, calibrated using experiments in microfluidic devices and accounting for the permeable structure of the fibrin cap, demonstrated that thrombin generated inside the thrombus was washed downstream through the fibrin network, thus limiting exposure of platelets on the thrombus surface to thrombin. Moreover, by restricting the approach of resting platelets in the flowing blood to the thrombus core, the fibrin cap impaired platelets from reaching regions of high thrombin concentration necessary for platelet activation and limited thrombus growth. The formation of a fibrin cap prevents small thrombi that frequently develop in the absence of major injury in the 60000 km of vessels in the body from developing into life threatening events.
  • Thumbnail Image
    Item
    Prediction of Ischemic Events after Percutaneous Coronary Intervention: Thrombelastography Profiles and Factor XIIIa Activity
    (Thieme Medical Publishers, 2018-04) Kreutz, Rolf P.; Schmeisser, Glen; Schaffter, Andrea; Kanuri, Sri; Owens, Janelle; Maatman, Benjamin; Sinha, Anjan; Lohe, Elisabeth von der; Breall, Jeffrey A.; Medicine, School of Medicine
    Background: High plasma fibrin clot strength (MA) measured by thrombelastography (TEG) is associated with increased risk of cardiac events after percutaneous coronary interventions (PCIs). Factor XIIIa (FXIIIa) cross-links soluble fibrin, shortens clot formation time (TEG-K), and increases final clot strength (MA). Methods: We analyzed platelet-poor plasma from patients with previous PCI. Kaolin-activated TEG (R, K, MA) in citrate platelet-poor plasma and FXIIIa were measured (n = 257). Combined primary endpoint was defined as recurrent myocardial infarction (MI) or cardiovascular death (CVD). Relationship of FXIIIa and TEG measurements on cardiac risk was explored. Results: FXIIIa correlated with TEG-MA (p = 0.002) and inversely with TEG-K (p < 0.001). High MA (≥35.35 mm; p = 0.001), low K (<1.15 min; p = 0.038), and elevated FXIIIa (≥83.51%; p = 0.011) were associated with increased risk of CVD or MI. Inclusion of FXIIIa activity and low TEG-K in risk scores did not improve risk prediction as compared with high TEG-MA alone. Conclusion: FXIIIa is associated with higher plasma TEG-MA and low TEG-K. High FXIIIa activity is associated with a modest increase in cardiovascular risk after PCI, but is less sensitive and specific than TEG-MA. Addition of FXIIIa does not provide additional risk stratification beyond risk associated with high fibrin clot strength phenotype measured by TEG.