Browsing by Subject "Doxycycline"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Development of an antibacterial and anti-metalloproteinase dental adhesive for long-lasting resin composite restorations
    (Royal Society of Chemistry, 2020-12) Münchow, Eliseu A.; da Silva, Adriana F.; Piva, Evandro; Cuevas-Suárez, Carlos E.; de Albuquerque, Maria T.P.; Pinal, Rodolfo; Gregory, Richard L.; Breschi, Lorenzo; Bottino, Marco C.; Biomedical Sciences and Comprehensive Care, School of Dentistry
    Despite all the advances in adhesive dentistry, dental bonds are still fragile due to degradation events that start during application of adhesive agents and the inherent hydrolysis of resin-dentin bonds. Here, we combined two outstanding processing methods (electrospinning and cryomilling) to obtain bioactive (antimicrobial and anti-metalloproteinase) fiber-based fillers containing a potent matrix metalloproteinase (MMP) inhibitor (doxycycline, DOX). Poly(ε)caprolactone solutions containing different DOX amounts (0, 5, 25, and 50 wt%) were processed via electrospinning, resulting in non-toxic submicron fibers with antimicrobial activity against Streptococcus mutans and Lactobacillus. The fibers were embedded in a resin blend, light-cured, and cryomilled for the preparation of fiber-containing fillers, which were investigated with antibacterial and in situ gelatin zymography analyzes. The fillers containing 0, 25, and 50 wt% DOX-releasing fibers were added to aliquots of a two-step, etch-and-rinse dental adhesive system. Mechanical strength, hardness, degree of conversion (DC), water sorption and solubility, bond strength to dentin, and nanoleakage analyses were performed to characterize the physico-mechanical, biological, and bonding properties of the modified adhesives. Statistical analyses (ANOVA; Kruskal-Wallis) were used when appropriate to analyze the data (α = 0.05). DOX-releasing fibers were successfully obtained, showing proper morphological architecture, cytocompatibility, drug release ability, slow degradation profile, and antibacterial activity. Reduced metalloproteinases (MMP-2 and MMP-9) activity was observed only for the DOX-containing fillers, which have also demonstrated antibacterial properties against tested bacteria. Adhesive resins modified with DOX-containing fillers demonstrated greater DC and similar mechanical properties as compared to the fiber-free adhesive (unfilled control). Concerning bonding performance to dentin, the experimental adhesives showed similar immediate bond strengths to the control. After 12 months of water storage, the fiber-modified adhesives (except the group consisting of 50 wt% DOX-loaded fillers) demonstrated stable bonds to dentin. Nanoleakage was similar among all groups investigated. DOX-releasing fibers showed promising application in developing novel dentin adhesives with potential therapeutic properties and MMP inhibition ability; antibacterial activity against relevant oral pathogens, without jeopardizing the physico-mechanical characteristics; and bonding performance of the adhesive.
  • Thumbnail Image
    Item
    Doxycycline-loaded nanotube-modified adhesives inhibit MMP in a dose-dependent fashion
    (Springer Nature, 2018-04) Palasuk, Jadesada; Windsor, L. Jack; Platt, Jeffrey A.; Lvov, Yuri; Geraldeli, Saulo; Bottino, Marco C.; Biomedical Sciences and Comprehensive Care, School of Dentistry
    OBJECTIVES: This article evaluated the drug loading, release kinetics, and matrix metalloproteinase (MMP) inhibition of doxycycline (DOX) released from DOX-loaded nanotube-modified adhesives. DOX was chosen as the model drug, since it is the only MMP inhibitor approved by the U.S. Food and Drug Administration. MATERIALS AND METHODS: Drug loading into the nanotubes was accomplished using DOX solution at distinct concentrations. Increased concentrations of DOX significantly improved the amount of loaded DOX. The modified adhesives were fabricated by incorporating DOX-loaded nanotubes into the adhesive resin of a commercial product. The degree of conversion (DC), Knoop microhardness, DOX release kinetics, antimicrobial, cytocompatibility, and anti-MMP activity of the modified adhesives were investigated. RESULTS: Incorporation of DOX-loaded nanotubes did not compromise DC, Knoop microhardness, or cell compatibility. Higher concentrations of DOX led to an increase in DOX release in a concentration-dependent manner from the modified adhesives. DOX released from the modified adhesives did not inhibit the growth of caries-related bacteria, but more importantly, it did inhibit MMP-1 activity. CONCLUSIONS: The loading of DOX into the nanotube-modified adhesives did not compromise the physicochemical properties of the adhesives and the released levels of DOX were able to inhibit MMP activity without cytotoxicity. CLINICAL SIGNIFICANCE: Doxycycline released from the nanotube-modified adhesives inhibited MMP activity in a concentration-dependent fashion. Therefore, the proposed nanotube-modified adhesive may hold clinical potential as a strategy to preserve resin/dentin bond stability.
  • Thumbnail Image
    Item
    MicroRNA-101a enhances trabecular bone accrual in male mice
    (Springer Nature, 2022-08-03) Dudakovic, Amel; Jerez, Sofia; Deosthale, Padmini J.; Denbeigh, Janet M.; Paradise, Christopher R.; Gluscevic, Martina; Zan, Pengfei; Begun, Dana L.; Camilleri, Emily T.; Pichurin, Oksana; Khani, Farzaneh; Thaler, Roman; Lian, Jane B.; Stein, Gary S.; Westendorf, Jennifer J.; Plotkin, Lilian I.; van Wijnen, Andre J.; Anatomy, Cell Biology and Physiology, School of Medicine
    High-throughput microRNA sequencing was performed during differentiation of MC3T3-E1 osteoblasts to develop working hypotheses for specific microRNAs that control osteogenesis. The expression data show that miR-101a, which targets the mRNAs for the epigenetic enzyme Ezh2 and many other proteins, is highly upregulated during osteoblast differentiation and robustly expressed in mouse calvaria. Transient elevation of miR-101a suppresses Ezh2 levels, reduces tri-methylation of lysine 27 in histone 3 (H3K27me3; a heterochromatic mark catalyzed by Ezh2), and accelerates mineralization of MC3T3-E1 osteoblasts. We also examined skeletal phenotypes of an inducible miR-101a transgene under direct control of doxycycline administration. Experimental controls and mir-101a over-expressing mice were exposed to doxycycline in utero and postnatally (up to 8 weeks of age) to maximize penetrance of skeletal phenotypes. Male mice that over-express miR-101a have increased total body weight and longer femora. MicroCT analysis indicate that these mice have increased trabecular bone volume fraction, trabecular number and trabecular thickness with reduced trabecular spacing as compared to controls. Histomorphometric analysis demonstrates a significant reduction in osteoid volume to bone volume and osteoid surface to bone surface. Remarkably, while female mice also exhibit a significant increase in bone length, no significant changes were noted by microCT (trabecular bone parameters) and histomorphometry (osteoid parameters). Hence, miR-101a upregulation during osteoblast maturation and the concomitant reduction in Ezh2 mediated H3K27me3 levels may contribute to the enhanced trabecular bone parameters in male mice. However, the sex-specific effect of miR-101a indicates that more intricate epigenetic mechanisms mediate physiological control of bone formation and homeostasis.
  • Thumbnail Image
    Item
    Synthesis, characterization and matrix metalloproteinase inhibition of doxycycline modified dental adhesives
    (2015) Palasuk, Jadesada; Windsor, L. Jack; Bottino, Marco C.; Platt, Jeffrey A.; Lee, Chao-Hung; Geraldeli, Saulo
    The biodegradation of the hybrid layer of dental restorations is due in part to the degradation of the demineralized collagen by matrix metalloproteinases (MMPs). During the bonding procedure, phosphoric acid/acidic primers activate MMPs that degrade denuded type I collagen. As a result, the hybrid layer loses its integrity overtime, leading to the failure of the resin composite restoration. This study aimed to evaluate doxycycline (DOX) for its effects on preventing the degradation of the hybrid layer through the modification of the dental adhesive with aluminosilicate clay nanotubes (HNT) loaded with doxycycline. Doxycycline was encapsulated into HNT at three distinct concentrations (10%, 20% and 30% DOX, w/v). The increases in the concentration of doxycycline significantly increased the amount of doxycycline that was encapsulated into HNT and the drug loading into the HNT. Conversely, the encapsulation efficiency was significantly decreased with the increases in concentration of doxycycline. The modified adhesives were fabricated by incorporation of DOX-encapsulated HNT into a commercially available dental adhesive (Adper Scotchbond Multi-Purpose, SBMP). The degree of conversion (DC), Knoop microhardness, doxycycline release profiles, the biological activity (antibacterial and anti-MMP activity), and cytocompatibility of the modified adhesives were investigated. There were no statistically significant differences (p > 0.05) in DC and Knoop microhardness compared to the control (SBMP). None of the adhesive eluates was cytotoxic to the human dental pulp stem cells. Although higher concentrations of doxycycline led to a higher release of doxycycline from the modified adhesives, the differences were not significant (p = 0.259) among the groups (10%, 20% and 30% DOX). A significant growth inhibition of S. mutans and L. casei by direct contact illustrated successful encapsulation of doxycycline into the modified adhesives. Doxycycline released from the modified adhesives did not inhibit the growth of both cariogenic bacteria but inhibited MMP-1 activity. The results suggested that subantimicrobial levels of doxycycline were gradually released. The immediate microtensile bond strengths were not significantly different from those of the control (SBMP), suggesting no negative effect of doxycycline on dentin bonding (only 10% DOX were investigated). The long-term resin-dentin bond durability should be evaluated.