Browsing by Author "Tastad, Carli A."

Now showing 1 - 5 of 5
  • Thumbnail Image
    Item
    Combined Thermoneutral Housing and Raloxifene Treatment Improves Trabecular Bone Microarchitecture and Strength in Growing Female Mice
    (Springer, 2023) Jacobson, Andrea; Tastad, Carli A.; Creecy, Amy; Wallace, Joseph M.; Orthopaedic Surgery, School of Medicine
    Thermoneutral housing and Raloxifene (RAL) treatment both have potential for improving mechanical and architectural properties of bone. Housing mice within a 30 to 32 °C range improves bone quality by reducing the consequences of cold stress, such as shivering and metabolic energy consumption (Chevalier et al. in Cell Metab 32(4):575-590.e7, 2020; Martin et al. in Endocr Connect 8(11):1455-1467, 2019; Hankenson et al. in Comp Med 68(6):425-438, 2018). Previous work suggests that Raloxifene can enhance bone strength and geometry (Ettinger et al. in Jama 282(7):637-645, 1999; Powell et al. in Bone Rep 12:100246, 2020). An earlier study in our lab utilized long bones to examine the effect of thermoneutral housing and Raloxifene treatment in mice, but no significant interactive effects were found. The lack of an impact is hypothesized to be connected to the short 6-week duration of the study and the type of bone analyzed. This study will examine the same question within the axial skeleton, which has a higher proportion of trabecular bone. After 6 weeks of treatment with RAL, vertebrae from female C57BL/6 J mice underwent microcomputed tomography (μCT), architectural analysis, and compression testing. Most of the tested geometric properties (bone volume/tissue volume percent, trabecular thickness, trabecular number, trabecular spacing) improved with both the housing and RAL treatment. The effect sizes suggested an additive effect when treating mice housed under thermoneutral conditions. While ultimate force was enhanced with the treatment and housing, force normalized by bone volume fraction was not significantly different between groups. For longer pre-clinical trials, it may be important to consider the impacts of temperature on mice to improve the accuracy of these models.
  • Thumbnail Image
    Item
    The Effect of Single Versus Group μCT on the Detection of Trabecular and Cortical Disease Phenotypes in Mouse Bones
    (Wiley, 2021-03-05) Kohler, Rachel; Tastad, Carli A.; Stacy, Alexander J.; Swallow, Elizabeth A.; Metzger, Corinne E.; Allen, Matthew R.; Wallace, Joseph M.; Biomedical Engineering, School of Engineering and Technology
    Micro‐computed tomography is a critical assessment tool for bone‐related preclinical research, especially in murine models. To expedite the scanning process, researchers often image multiple bones simultaneously; however, it is unknown if this impacts scan quality and alters the ability to detect differences between experimental groups. The purpose of this study was to assess the effect of multibone scanning on detecting disease‐induced changes in bone microarchitecture and mineral density by group scanning two murine models with known skeletal defects: the Col1a2 G610C/+ model of osteogenesis imperfecta and an adenine‐induced model of chronic kidney disease. Adult male femurs were scanned individually and in random groups of three and eight in a Bruker Skyscan 1172 and 1176, respectively, then assessed for standard trabecular and cortical bone measures. Although scanning methodology altered raw values, with trabecular microarchitecture values more affected than cortical properties, a disease phenotype was still detectable in both group and solo scans. However, tissue mineral density in both trabecular and cortical bone was significantly impacted by group versus solo scanning. Researchers may be able to use small groupings in a single μCT scan to expedite preclinical analyses when the overall bone phenotype is large to decrease costs and increase speed of discoveries; however the details of scanning (single or group) should always be reported.
  • Thumbnail Image
    Item
    Limited Impacts of Thermoneutral Housing on Bone Morphology and Mechanical Properties in Growing Female Mice Exposed to External Loading and Raloxifene Treatment
    (Elsevier, 2021) Tastad, Carli A.; Kohler, Rachel; Wallace, Joseph M.; Biomedical Engineering, School of Engineering and Technology
    Thermoregulation is an important factor that could have physiological consequences on pre-clinical research outcomes. Simply housing mice at thermoneutral temperature has been shown to prevent the well-established loss of cancellous bone that is typical in growing mice. In this study, active tissue formation was induced by non-invasive tibial loading in female mice and combined with raloxifene treatment to assess whether temperature could enhance their combined effects on bone morphology and mechanical properties. It was hypothesized that by removing the cold stress under which normal lab mice are housed, a metabolic boost would allow for further architectural and mechanical improvements in mice exposed to a combination of tibial loading and raloxifene. Ten-week old female C57BL/6J mice were treated with raloxifene, underwent tibial loading to a maximum tensile stress of 2050 με, and were housed in thermoneutral conditions (32 °C) for 6 weeks. We investigated bone morphology through microcomputed tomography (μCT), mechanical properties via four-point bending, and fracture toughness testing. Results confirmed previous work showing a combined effect of external loading and raloxifene which led to greater improvements in most properties than either individual treatment. Counter to the hypothesis, temperature had modest effects on body weight, overall bone size, and trabecular architecture, and most effects were detrimental. Thermoneutrality had no impact on mechanical integrity or fracture toughness. In most cases, the magnitude of temperature-based effects were less robust than either RAL treatment or loading.
  • Thumbnail Image
    Item
    Morphological and mechanical characterization of bone phenotypes in the Amish G610C murine model of osteogenesis imperfecta
    (PLOS, 2021-08-27) Kohler, Rachel; Tastad, Carli A.; Creecy, Amy; Wallace, Joseph M.; Biomedical Engineering, School of Engineering and Technology
    Osteogenesis imperfecta (OI) is a hereditary bone disease where gene mutations affect Type I collagen formation resulting in osteopenia and increased fracture risk. There are several established mouse models of OI, but some are severe and result in spontaneous fractures or early animal death. The Amish Col1a2G610C/+ (G610C) mouse model is a newer, moderate OI model that is currently being used in a variety of intervention studies, with differing background strains, sexes, ages, and bone endpoints. This study is a comprehensive mechanical and architectural characterization of bone in G610C mice bred on a C57BL/6 inbred strain and will provide a baseline for future treatment studies. Male and female wild-type (WT) and G610C mice were euthanized at 10 and 16 weeks (n = 13-16). Harvested tibiae, femora, and L4 vertebrae were scanned via micro-computed tomography and analyzed for cortical and trabecular architectural properties. Femora and tibiae were then mechanically tested to failure. G610C mice had less bone but more highly mineralized cortical and trabecular tissue than their sex- and age-matched WT counterparts, with cortical cross-sectional area, thickness, and mineral density, and trabecular bone volume, mineral density, spacing, and number all differing significantly as a function of genotype (2 Way ANOVA with main effects of sex and genotype at each age). In addition, mechanical yield force, ultimate force, displacement, strain, and toughness were all significantly lower in G610C vs. WT, highlighting a brittle phenotype. This characterization demonstrates that despite being a moderate OI model, the Amish G610C mouse model maintains a distinctly brittle phenotype and is well-suited for use in future intervention studies.
  • Thumbnail Image
    Item
    Thermoneutral Housing Did Not Impact the Combined Effects of External Loading and Raloxifene on Bone Morphology and Mechanical Properties in Growing Female Mice
    (2020-12) Tastad, Carli A.; Wallace, Joseph M.; Allen, Matthew R.; Li, Jiliang
    Raloxifene is an FDA-approved selective estrogen receptor modulator (SERM) that improves tissue quality by binding to collagen and increasing the bound water content in the bone matrix in a cell-independent manner. In this thesis, active tissue formation was induced by non-invasive external tibial loading in female mice and combined with raloxifene treatment to assess their combined effect on bone morphology and mechanical properties. Thermoregulation is an important factor that could have physiological consequences on research outcomes, and was introduced as an additional experimental factor in this study. We hypothesized that by removing the mild cold stress under which normal lab animals are housed, a metabolic boost would allow for further architectural and mechanical improvements as a result of the combination of tibial loading and raloxifene treatment. Ten week old female C57BL/6J mice were treated with raloxifene, underwent tibial loading to a strain level of 2050µε and were housed in thermoneutral conditions (32°C) for 6 weeks. We investigated bone morphology through microcomputed tomography (µCT) and mechanical properties via four-point bending and fracture toughness testing. Results indicated a combined improvement by external loading and raloxifene on geometry, particularly in the cancellous region of the bone, and also in bone mechanics leading to greater improvements than either treatment individually. Temperature did not have a robust impact on either bone architecture or mechanical integrity.