ScholarWorksIndianapolis
  • Communities & Collections
  • Browse ScholarWorks
  • English
  • Català
  • Čeština
  • Deutsch
  • Español
  • Français
  • Gàidhlig
  • Italiano
  • Latviešu
  • Magyar
  • Nederlands
  • Polski
  • Português
  • Português do Brasil
  • Suomi
  • Svenska
  • Türkçe
  • Tiếng Việt
  • Қазақ
  • বাংলা
  • हिंदी
  • Ελληνικά
  • Yкраї́нська
  • Log In
    or
    New user? Click here to register.Have you forgotten your password?
  1. Home
  2. Browse by Author

Browsing by Author "Shin, Donghyun"

Now showing 1 - 1 of 1
Results Per Page
Sort Options
  • Loading...
    Thumbnail Image
    Item
    Corrosion resistance and thermal stability of sputtered Fe44Al34Ti7N15 and Al61Ti11N28 thin films for prospective application in oil and gas industry
    (Elsevier, 2021-10-01) Maruf, Mahbub Alam; Rizvi, Syed Muhammad Mujtaba; Noor-A-Alam, Mohammed; Shin, Donghyun; Haider, Waseem; Shabib, Ishraq; Mechanical and Energy Engineering, School of Engineering and Technology, IUPUC
    Fe-and Al-based thin-film metallic glass coatings (Fe44Al34Ti7N15 and Al61Ti11N28) were fabricated using magnetron co-sputtering technique, and their corrosion performances compared against wrought 316L stainless steel. The results of GI-XRD and XPS analyses demonstrated amorphous structure and oxide layer formation on the surface of the fabricated thin films, respectively. The potentiodynamic (PD) polarization test in chloride-thiosulfate (NH4Cl ​+ ​Na2S2O3) solution revealed lower corrosion current (Icorr) (0.42 ​± ​0.02 ​μA/cm2 and 0.086 ​± ​0.001 ​μA/cm2 Vs. 0.76 ​± ​0.05 ​μA/cm2), lower passivation current (Ipass) (1.45 ​± ​0.03 ​μA/cm2 and 1.83 ​± ​0.07 ​μA/cm2 Vs. 1.98 ​± ​0.04 ​μA/cm2), and approximately six-fold higher breakdown potential (Ebd) for Fe- and Al-based coatings than those of wrought 316L stainless steel. Electrochemical Impedance Spectroscopy (EIS) of both films showed 4- and 2-fold higher charge transfer resistance (Rct), 7- and 2.5-times higher film resistance (Rf), lower film capacitance values (Qf) (10 ​± ​2.4 ​μS-sacm-2, and 5.41 ​± ​0.8 ​μS-sacm-2 Vs. 18 ​± ​2.21 ​μS-sacm-2), and lower double-layer capacitance values (Qdl) (31.33 ​± ​4.74 ​μS-sacm-2, and 15.3 ​± ​0.48 ​μS-sacm-2 Vs. 43 ​± ​4.23 ​μS-sacm-2), indicating higher corrosion resistance of the thin films. Cyclic Voltammetry (CV) scan exhibited that the passive films formed on the Fe- and Al-based coatings were more stable and less prone to pitting corrosion than the wrought 316L stainless steel. The surface morphology of both films via SEM endorsed the CV scan results, showing better resistance to pitting corrosion. Furthermore, the thermal analysis via TGA and DSC revealed the excellent thermal stability of the thin films over a wide temperature range typically observed in oil-gas industries.
About IU Indianapolis ScholarWorks
  • Accessibility
  • Privacy Notice
  • Copyright © 2025 The Trustees of Indiana University