Browsing by Author "Parkar, Omkar"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Modified Particle Swarm Optimization Based Powertrain Energy Management for Range Extended Electric Vehicle
    (MDPI, 2023-06-30) Parkar, Omkar; Snyder, Benjamin; Rahi, Adibuzzaman; Anwar, Sohel; Mechanical and Energy Engineering, School of Engineering and Technology
    The efficiency of hybrid electric powertrains is heavily dependent on energy and power management strategies, which are sensitive to the dynamics of the powertrain components that they use. In this study, a Modified Particle Swarm Optimization (Modified PSO) methodology, which incorporates novel concepts such as the Vector Particle concept and the Seeded Particle concept, has been developed to minimize the fuel consumption and NOx emissions for an extended-range electric vehicle (EREV). An optimization problem is formulated such that the battery state of charge (SOC) trajectory over the entire driving cycle, a vector of size 50, is to be optimized via a control lever consisting of 50 engine/generator speed points spread over the same 2 h cycle. Thus, the vector particle consisted of the battery SOC trajectory, having 50 elements, and 50 engine/generator speed points, resulting in a 100-D optimization problem. To improve the convergence of the vector particle PSO, the concept of seeding the vector particles was introduced. Additionally, further improvements were accomplished by adapting the Time-Varying Acceleration Coefficients (TVAC) PSO and Frankenstein’s PSO features to the vector particles. The MATLAB/SIMULINK platform was used to validate the developed commercial vehicle hybrid powertrain model against a similar ADVISOR powertrain model using a standard rule-based PMS algorithm. The validated model was then used for the simulation of the developed, modified PSO algorithms through a multi-objective optimization strategy using a weighted sum fitness function. Simulation results show that a fuel consumption reduction of 12% and a NOx emission reduction of 35% were achieved individually by deploying the developed algorithms. When the multi-objective optimization was applied, a simultaneous reduction of 9.4% fuel consumption and 7.9% NOx emission was achieved when compared to the baseline model with the rule-based PMS algorithm.
  • Thumbnail Image
    Item
    Multi-Objective Optimization of Plug-In HEV Powertrain Using Modified Particle Swarm Optimization
    (2021-05) Parkar, Omkar; Anwar, Sohel; Tovar, Andres; Li, Lingxi
    An increase in the awareness of environmental conservation is leading the automotive industry into the adaptation of alternatively fueled vehicles. Electric, Fuel-Cell as well as Hybrid-Electric vehicles focus on this research area with the aim to efficiently utilize vehicle powertrain as the first step. Energy and Power Management System control strategies play a vital role in improving the efficiency of any hybrid propulsion system. However, these control strategies are sensitive to the dynamics of the powertrain components used in the given system. A kinematic mathematical model for Plug-in Hybrid Electric Vehicle (PHEV) has been developed in this study and is further optimized by determining optimal power management strategy for minimal fuel consumption as well as NOx emissions while executing a set drive cycle. A multi-objective optimization using weighted sum formulation is needed in order to observe the trade-off between the optimized objectives. Particle Swarm Optimization (PSO) algorithm has been used in this research, to determine the trade-off curve between fuel and NOx. In performing these optimizations, the control signal consisting of engine speed and reference battery SOC trajectory for a 2-hour cycle is used as the controllable decision parameter input directly from the optimizer. Each element of the control signal was split into 50 distinct points representing the full 2 hours, giving slightly less than 2.5 minutes per point, noting that the values used in the model are interpolated between the points for each time step. With the control signal consisting of 2 distinct signals, speed, and SOC trajectory, as 50 element time-variant signals, a multidimensional problem was formulated for the optimizer. Novel approaches to balance the optimizer exploration and convergence, as well as seeding techniques are suggested to solve the optimal control problem. The optimization of each involved individual runs at 5 different weight levels with the resulting cost populations being compiled together to visually represent with the help of Pareto front development. The obtained results of simulations and optimization are presented involving performances of individual components of the PHEV powertrain as well as the optimized PMS strategy to follow for a given drive cycle. Observations of the trade-off are discussed in the case of Multi-Objective Optimizations.