Browsing by Author "Mullins, C. Buddie"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    Blade-Type Reaction Front in Micrometer-Sized Germanium Particles during Lithiation
    (ACS, 2020-09) Zhou, Xinwei; Li, Tianyi; Cui, Yi; Meyerson, Melissa L.; Weeks, Jason A.; Mullins, C. Buddie; Jin, Yang; Shin, Hosop; Liu, Yuzi; Zhu, Likun; Mechanical and Energy Engineering, School of Engineering and Technology
    To investigate the lithium transport mechanism in micrometer-sized germanium (Ge) particles, in situ focused ion beam–scanning electron microscopy was used to monitor the structural evolution of individual Ge particles during lithiation. Our results show that there are two types of reaction fronts during lithiation, representing the differences of reactions on the surface and in bulk. The cross-sectional SEM images and transmission electron microscopy characterizations show that the interface between amorphous LixGe and Ge has a wedge shape because of the higher Li transport rate on the surface of the particle. The blade-type reaction front is formed at the interface of the amorphous LixGe and crystalline Ge and is attributed to the large strain at the interface.
  • Thumbnail Image
    Item
    In Situ and Operando Investigation of the Dynamic Morphological and Phase Changes of Selenium-doped Germanium Electrode during (De)Lithiation Processes
    (RSC, 2020-01) Li, Tianyi; Lim, Cheolwoong; Cui, Yi; Zhou, Xinwei; Kang, Huixiao; Yan, Bo; Meyerson, Melissa L.; Weeks, Jason A.; Liu, Qi; Guo, Fangmin; Kou, Ronghui; Liu, Yuzi; De Andrade, Vincent; De Carlo, Francesco; Ren, Yang; Sun, Cheng-Jun; Mullins, C. Buddie; Chen, Lei; Fu, Yongzhu; Zhu, Likun; Mechanical and Energy Engineering, School of Engineering and Technology
    To understand the effect of selenium doping on the good cycling performance and rate capability of a Ge0.9Se0.1 electrode, the dynamic morphological and phase changes of the Ge0.9Se0.1 electrode were investigated by synchrotron-based operando transmission X-ray microscopy (TXM) imaging, X-ray diffraction (XRD), and X-ray absorption spectroscopy (XAS). The TXM results show that the Ge0.9Se0.1 particle retains its original shape after a large volume change induced by (de)lithiation and undergoes a more sudden morphological and optical density change than pure Ge. The difference between Ge0.9Se0.1 and Ge is attributed to a super-ionically conductive Li–Se–Ge network formed inside Ge0.9Se0.1 particles, which contributes to fast Li-ion pathways into the particle and nano-structuring of Ge as well as buffering the volume change of Ge. The XRD and XAS results confirm the formation of a Li–Se–Ge network and reveal that the Li–Se–Ge phase forms during the early stages of lithiation and is an inactive phase. The Li–Se–Ge network also can suppress the formation of the crystalline Li15Ge4 phase. These in situ and operando results reveal the effect of the in situ formed, super-ionically conductive, and inactive network on the cycling performance of Li-ion batteries and shed light on the design of high capacity electrode materials.
  • Thumbnail Image
    Item
    In Situ Focused Ion Beam-Scanning Electron Microscope Study of Crack and Nanopore Formation in Germanium Particle During (De)lithiation
    (ACS, 2019-04) Zhou, Xinwei; Li, Tianyi; Cui, Yi; Meyerson, Melissa L.; Mullins, C. Buddie; Liu, Yuzi; Zhu, Likun; Mechanical and Energy Engineering, School of Engineering and Technology
    Germanium has emerged as a promising high-capacity anode material for lithium ion batteries. To understand the microstructure evolution of germanium under different cycling rates, we monitored single germanium particle batteries using an in situ focused ion beam-scanning electron microscope. Our results show that both the lithium concentration and delithiation rate have an impact on nanopore formation. This study reveals that germanium electrodes with low and high cycling rates have better microstructure integrity, which leads to better cycling performance. The nanopores tend to aggregate into large porous structures during cycling which leads to particle pulverization and capacity fading of the electrode.
  • Thumbnail Image
    Item
    Lithium trapping in germanium nanopores during delithiation process
    (Elsevier, 2021-09) Zhou, Xinwei; Li, Tianyi; Cui, Yi; Meyerson, Melissa L.; Weeks, Jason A.; Mullins, C. Buddie; Yang , Shengfeng; Liu, Yuzi; Zhu, Likun; Mechanical and Energy Engineering, School of Engineering and Technology
    Irreversible capacity loss is a critical problem in high capacity anode materials of Li-ion batteries, such as silicon, germanium, and tin. In addition to solid electrolyte interface formation and active material loss, Li trapping in high capacity anode materials during cycling has been considered a new mechanism of capacity loss but received less attention. In this study, we used single particle battery-based in situ focused ion beam-scanning electron microscopy, transmission electron microscopy (TEM), and scanning TEM to investigate the microstructure and composition of germanium nanopores formed at the end of delithiation. Our results show that a significant amount of Li accumulates inside the nanopores.