Browsing by Author "Marrey, Mallikharjun"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Item
    A Novel Framework for Predictive Modeling and Optimization of Powder Bed Fusion Process
    (MDPI, 2021-10) Marrey, Mallikharjun; Malekipour, Ehsan; El-Mounayri, Hazim; Faierson, Eric J.; Agarwal, Mangilal; Mechanical and Energy Engineering, School of Engineering and Technology
    Powder bed fusion (PBF) process is a metal additive manufacturing process which can build parts with any complexity from a wide range of metallic materials. PBF process research has predominantly focused on the impact of only a few parameters on product properties due to the lack of a systematic approach for optimizing a large set of process parameters simultaneously. The pivotal challenges regarding this process require a quantitative approach for mapping the material properties and process parameters onto the ultimate quality; this will then enable the optimization of those parameters. In this study, we propose a two-phase framework for optimizing the process parameters and developing a predictive model for 316L stainless steel material. We also discuss the correlation between process parameters -- i.e., laser specifications -- and mechanical properties and how to achieve parts with high density (> 98%) as well as better ultimate mechanical properties. In this paper, we introduce and test an innovative approach for developing AM predictive models, with a relatively low error percentage of 10.236% that are used to optimize process parameters in accordance with user or manufacturer requirements. These models use support vector regression, random forest regression, and neural network techniques. It is shown that the intelligent selection of process parameters using these models can achieve an optimized density of up to 99.31% with uniform microstructure, which improves hardness, impact strength, and other mechanical properties.
  • Thumbnail Image
    Item
    A Novel Framework of Developing a Predictive Model for Powder Bed Fusion Process
    (Mary Ann Liebert, 2024) Marrey, Mallikharjun; Malekipour, Ehsan; El-Mounayri, Hazim; Faierson, Eric J.; Agarwal, Mangilal; Mechanical and Energy Engineering, Purdue School of Engineering and Technology
    The powder bed fusion (PBF) process is a metal additive manufacturing process, which can build parts with any complexity from a wide range of metallic materials. PBF process research has predominantly focused on the impact of only a few parameters on product properties due to the lack of a systematic approach for predictive modeling of a large set of process parameters simultaneously. The pivotal challenges regarding this process require a quantitative approach for mapping the material properties and process parameters onto the ultimate quality; this will then enable the optimization of those parameters. In this study, we propose a two-phase framework for studying the process parameters and developing a predictive model for 316L stainless steel material. We also discuss the correlation between process parameters that is, laser specifications and mechanical properties, and how to obtain an optimum range of volumetric energy density for producing parts with high density (>99%), as well as better ultimate mechanical properties. In this article, we introduce and test an innovative approach for developing AM predictive models, with a relatively low error percentage (i.e., around 10%), which are used for process parameter selection in accordance with user or manufacturer part performance requirements. These models are based on techniques such as support vector regression, random forest regression, and neural network. It is shown that the intelligent selection of process parameters using these models can achieve a high density of up to 99.31% with uniform microstructure, which improves hardness, impact strength, and other mechanical properties.
  • Thumbnail Image
    Item
    A Framework for Optimizing Process Parameters in Powder Bed Fusion (PBF) Process using Artificial Neural Network (ANN)
    (2019-08) Marrey, Mallikharjun; El-Mounayri, Hazim; Zhang, Jing; Tovar, Andres
    Powder bed fusion (PBF) process is a metal additive manufacturing process, which can build parts with any complexity from a wide range of metallic materials. Research in the PBF process predominantly focuses on the impact of a few parameters on the ultimate properties of the printed part. The lack of a systematic approach to optimizing the process parameters for a better performance of given material results in a sub-optimal process limiting the potential of the application. This process needs a comprehensive study of all the influential parameters and their impact on the mechanical and microstructural properties of a fabricated part. Furthermore, there is a need to develop a quantitative system for mapping the material properties and process parameters with the ultimate quality of the fabricated part to achieve improvement in the manufacturing cycle as well as the quality of the final part produced by the PBF process. To address the aforementioned challenges, this research proposes a framework to optimize the process for 316L stainless steel material. This framework characterizes the influence of process parameters on the microstructure and mechanical properties of the fabricated part using a series of experiments. These experiments study the significance of process parameters and their variance as well as study the microstructure and mechanical properties of fabricated parts by conducting tensile, impact, hardness, surface roughness, and densification tests, and ultimately obtain the optimum range of parameters. This would result in a more complete understanding of the correlation between process parameters and part quality. Furthermore, the data acquired from the experiments are employed to develop an intelligent parameter suggestion multi-layer feedforward (FF) backpropagation (BP) artificial neural network (ANN). This network estimates the fabrication time and suggests the parameter setting accordingly to the user/manufacturers desired characteristics of the end-product. Further, research is in progress to evaluate the framework for assemblies and complex part designs and incorporate the results in the network for achieving process repeatability and consistency.
  • Thumbnail Image
    Item
    A Framework for Optimizing Process Parameters in Powder Bed Fusion (PBF) Process Using Artificial Neural Network (ANN)
    (2019) Marrey, Mallikharjun; Malekipour, Ehsan; El-Mounayri, Hazim; Faierson, Eric J.; Mechanical and Energy Engineering, School of Engineering and Technology
    Powder bed fusion (PBF) process is a metal additive manufacturing process, which can build parts with any complexity from a wide range of metallic materials. Research in the PBF process predominantly focuses on the impact of few parameters on the ultimate properties of the printed part. The lack of a systematic approach to optimizing the process parameters for a better performance of given material results in a sub-optimal process. This process needs a comprehensive study of all the influential parameters and their impact on the mechanical and microstructural properties of a fabricated part. Furthermore, there is a need to develop a quantitative system for mapping the material properties and process parameters with the ultimate quality of the fabricated part to achieve improvement in the manufacturing cycle as well as the quality of the final part produced by the PBF process. To address the aforementioned challenges, this research proposes a framework to optimize the process for 316L stainless steel material. This framework characterizes the influence of process parameters on the microstructure and mechanical properties of the fabricated part using a series of experiments. These experiments study the significance of process parameters and their variance as well as study the microstructure and mechanical properties of fabricated parts by conducting tensile, impact, hardness, surface roughness, and densification tests, and ultimately obtain the optimum range of parameters. This would result in a more complete understanding of the correlation between process parameters and part quality. Furthermore, these experiments provide the required data needed to develop an Artificial Neural Network (ANN) model to optimize process parameters (for achieving the desired properties) and estimate fabrication time.