Browsing by Author "Lee, Brian Dalvin, 1942-"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    A laboratory study of the adhesion of a restorative acrylic resin and a polycarboxylate cement on bovine enamel etched with fifty per cent phosphoric acid
    (1970) Lee, Brian Dalvin, 1942-; Gilmore, H. William (Homer William); Mercer, Victor H., 1928-; Garner, La Forrest Dean, 1933-
    The purpose of this laboratory study was to determine whether etching of flat bovine enamel surfaces with a 50 per cent aqueous solution of phosphoric acid for 60 seconds increases the bonding of a conventional restorative acrylic resin and a new polycarboxylate cement. The test specimens were subjected to 24 hours, 30 days and six months storage in water and then subjected• to temperature stress cycling and intermittent tensile stress cycling. A tensile test was used to measure the bond strength of both materials. The results of the Newman-Keul's test showed that pretreating the enamel surface with 50 per cent phosphoric acid significantly increased the bonding of the restorative resin, and that the cavity sealer supplied by the manufacturer further improved the resin attachment to enamel surfaces previously etched with phosphoric acid. The bonding of the resin to acid-etched enamel surfaces pretreated with or without the cavity sealer was unaffected by prolonged storage in water, temperature stress cycling, and intermittent tensile stress cycling. However, a significant reduction in the adhesion of the acrylic resin to polished-enamel surfaces pretreated with or without the cavity sealer was observed when the test specimens were subjected to the same testing conditions. The data obtained for the polycarboxylate cement test specimens showed that etching of the enamel surface with phosphoric acid also provided slightly higher adhesive values than the control specimens. Results obtained revealed that prolonged storage in water, and temperature and mechanical stress cycling did not affect the adhesion of the polycarboxylate cement to acid-etched enamel surfaces. However, thermal and mechanical stress cycling after prolonged storage in water appeared to decrease the adhesion of the cement to polished enamel surfaces. When Ca45 was used to assess the marginal seal of resin restorations placed into acid-etched Class V cavity preparations in extracted human teeth, the autoradiographs showed that etching of the cavity preparations with 50 per cent phosphoric acid improved the marginal seal of the restorative resin after one-week storage in water. When both the acid-etched and control restorations were thermal stress cycled 2500 times at a 40°C temperature differential, a slight improvement in the marginal seal of the acid-etched restorations was observed.