Browsing by Author "Aliahmad, Nojan"

Now showing 1 - 10 of 12
  • Thumbnail Image
    Item
    Electrospun Nanofibers for Label-Free Sensor Applications
    (MDPI, 2019-08-17) Aliheidari, Nahal; Aliahmad, Nojan; Agarwal, Mangilal; Dalir, Hamid; Engineering Technology, School of Engineering and Technology
    Electrospinning is a simple, low-cost and versatile method for fabricating submicron and nano size fibers. Due to their large surface area, high aspect ratio and porous structure, electrospun nanofibers can be employed in wide range of applications. Biomedical, environmental, protective clothing and sensors are just few. The latter has attracted a great deal of attention, because for biosensor application, nanofibers have several advantages over traditional sensors, including a high surface-to-volume ratio and ease of functionalization. This review provides a short overview of several electrospun nanofibers applications, with an emphasis on biosensor applications. With respect to this area, focus is placed on label-free sensors, pertaining to both recent advances and fundamental research. Here, label-free sensor properties of sensitivity, selectivity, and detection are critically evaluated. Current challenges in this area and prospective future work is also discussed.
  • Thumbnail Image
    Item
    Electrospun Thermosetting Carbon Nanotube–Epoxy Nanofibers
    (ACS, 2021-02) Aliahmad, Nojan; Biswas, Pias Kumar; Wable, Vidya; Hernandez, Iran; Siegel, Amanda; Dalir, Hamid; Agarwal, Mangilal; Mechanical and Energy Engineering, School of Engineering and Technology
    This paper represents the process of fabrication and characterization of submicron carbon nanotube (CNT)–epoxy nanocomposite filaments through an electrospinning process. Electrospinning is one of the most versatile, inexpensive, and environmentally well-known techniques for producing continuous fibers from submicron diameter all the way to tens of nanometer diameter. Here, electrospinning of submicron epoxy filaments was made possible by partial curing of the epoxy by mixing the hardener and through a thermal treatment process without the need for adding any plasticizers or thermoplastic binders. This semicuring approach makes the epoxy solution viscous enough for the electrospinning process, that is, without any solidification or nonuniformity caused by the presence of the hardener inside the mixture. The filaments were spun using a CNT/epoxy solution with a viscosity of 65 p using 16 kV and a collector distance of 10 cm. The diameter of these filaments can be tuned as low as 100 nm with adjustment of electrospinning parameters. By incorporating a low amount of CNT into epoxy, better structural, electrical, and thermal stabilities were achieved. The CNT fibers have been aligned inside the epoxy filaments because of the presence of the electrostatic field during the electrospinning process. The modulus of the epoxy and CNT/epoxy filaments were found to be 3.24 and 4.84 GPa, respectively. The presence of the CNT can lead up to 49% improvement on modulus. Accordingly, using a commercially available epoxy suitable for industrial composite productions makes the developed filament suitable for many applications.
  • Thumbnail Image
    Item
    Engineering the electrospinning of MWCNTs/epoxy nanofiber scaffolds to enhance physical and mechanical properties of CFRPs
    (Elsevier, 2021-09) Wable, Vidya; Biswas, Pias Kumar; Moheimani, Reza; Aliahmad, Nojan; Omole, Peter; Siegel, Amanda P.; Agarwal, Mangilal; Dalir, Hamid; Mechanical Engineering, School of Engineering and Technology
    A cost-effective approach to improve the physical and mechanical properties of carbon fiber reinforced polymer (CFRP) prepreg composites, where electrospun multiwalled carbon nanotubes (MWCNTs)/epoxy nanofibers were synthesized and incorporated in between the layers of conventional CFRP prepreg composite has been presented. MWCNT-aligned epoxy nanofibers were successfully produced by an optimized electrospinning process. Nanofibers were deposited directly onto prepreg layers to achieve improved adhesion and interfacial bonding, leading to added strength and improvements in other mechanical properties. Thus, interlaminar shear strength (ILSS) and fatigue performance at high-stress regimes increased by 29% and 27%, respectively. Barely visible impact damage (BVID) energy increased significantly by up to 45%. The thermal and electrical conductivities were also enhanced significantly due to the presence of the highly conductive MWCNT networks between the CFRP layers. The presented method was capable of uniformly depositing high contents of MWCNTs at interlaminar ply interface of prepregs to strengthen/enhance CFRP properties, which has not been previously shown to be possible due to high resin viscosity caused by randomly oriented MWCNTs in epoxy system.
  • Thumbnail Image
    Item
    Fabrication of Submicron Thermosetting Carbon Nanotube-Epoxy Fibers Using Electrospinning
    (American Society for Composites, 2020-09-20) Aliahmad, Nojan; Wable, Vidya; Biswas, Pias Kumar; Hernadez, Iran; Dalir, Hamid; Agarwal, Mangilal
    Recently epoxy-based nanocomposites are gaining tremendous attention in many structural applications such as those in aerospace, automotive and motorsports. This research represents a new approach to fabricate submicron thermoset epoxy filaments enhanced with carbon nanotubes (CNT), through optimized curing followed by an electrospinning process. The optimized curing process is based on the uniform mixing of CNT with epoxy, and partial curing of the CNT/epoxy mixture with the hardener through a thermal treatment without adding any plasticizers or thermoplastic binders. Later the fibers have been made by electrospinning of the semi-cured mixture. Fig 1 shows the fabrication process of the described filaments. The key goal is to make the thermosetting epoxy without adding any thermoplastic to keep the integrity and quality of the fibers. The diameters of these filaments can be tuned between 100 nm to 500nm. Further, the CNT structure has been aligned inside the filament structure by the presence of the electrostatic field during the electrospinning process results in better stability and smaller diameters for the fibers. The fabricated filaments show that adding a low amount of CNT in the epoxy structure, better structural, electrical and thermal stability, has been achieved.
  • Thumbnail Image
    Item
    Overview of Nano-Fiber Mats Fabrication via Electrospinning and Morphology Analysis
    (MDPI, 2021) Ahmadian, Amirhossein; Shafiee, Abbas; Aliahmad, Nojan; Agarwal, Mangilal; Mechanical and Energy Engineering, School of Engineering and Technology
    Electrospun nano-fibers exhibit two significant properties: a high surface-to-volume ratio and a relatively defect-free molecular structure. Due to the high surface-to-volume ratio, electro-spun materials are well suited for activities requiring increased physical contact, such as providing a site for a chemical reaction or filtration of small-sized physical materials. However, electrospinning has many shortcomings, including difficulties in producing inorganic nanofibers and a limited number or variety of polymers used in the process. The fabrication of nanofiber bundles via electrospinning is explored in this analytical study and the relationship between all effective electrospinning parameters and the relative abundance of various fiber morphologies. Numerous variables could impact the fabrication of nanofibers, resulting in a variety of morphologies such as uniform, entangled, individual beads, beads-on-string, etc. Therefore, adequate ambient conditions and selecting the appropriate polymer and solvent for achieving a homogenous polymer solution and uniform with desired nanofiber properties for different applications of electro-spun materials are examined. Finally, the promising applications of nano-fine fibers in various fields achieved via electrospinning are studied in this paper.
  • Thumbnail Image
    Item
    Paper-Based Flexible Lithium-Ion Batteries
    (Office of the Vice Chancellor for Research, 2014-04-11) Aliahmad, Nojan; Shrestha, Sudhir; Agarwal, Mangilal; Varahramyan, Kody
    Paper-based flexible batteries have a wide range of applications in paper-based platforms, including in paper electronics, packaging, product displays, greeting cards, and sensors. This poster will present lithium-ion batteries using flexible paper-based current collectors. These current collectors were fabricated from wood microfibers that were coated with carbon nanotubes (CNT) through an electrostatic layer-by-layer nanoassembly process. The use of paper-based current collectors provides flexibility and improved electrode adhesion. Electrodes were fabricated by casting thin layers of lithium titanium oxide, lithium cobalt oxide or lithium magnesium oxide on the conductive paper. Half-cell and full-cell devices were fabricated and tested. The results show that the presented batteries use reduced mass loading of carbon nanotubes (10.1 μg/cm2) compared to CNT film based batteries. Experimental capacities of the half-cell devices were measured to be 150 mAh/g for lithium cobalt oxide, 158 mAh/g for lithium titanium oxide, and 130 mAh/g for lithium magnesium oxide. Device designs, fabrication processes of paper-based current collectors, electrodes, and batteries, and further experimental results, including solid electrolytes, will be presented.
  • Thumbnail Image
    Item
    Paper-based lithium-Ion batteries using carbon nanotube-coated wood microfiber current collectors
    (2013-11-06) Aliahmad, Nojan; Varahramyan, Kody; Agarwal, Mangilal; Shrestha, Sudhir; Rizkalla, Maher E.; King, Brian
    The prevalent applications of energy storage devices have incited wide-spread efforts on production of thin, flexible, and light-weight lithium-ion batteries. In this work, lithium-ion batteries using novel flexible paper-based current collectors have been developed. The paper-based current collectors were fabricated from carbon nanotube (CNT)-coated wood microfibers (CNT-microfiber paper). This thesis presents the fabrication of the CNT-microfiber paper using wood microfibers, coating electrode materials, design and assemblies of battery, testing methodologies, and experimental results and analyses. Wood microfibers were coated with carbon nanotubes and poly(3,4-ethylenedioxythiophene) (PEDOT) through an electrostatic layer-by-layer nanoassembely process and formed into a sheet, CNT-microfiber paper. The CNT loading of the fabricated paper was measured 10.1 μg/cm2 subsequently considered. Electrode material solutions were spray-coated on the CNT-microfiber paper to produce electrodes for the half and full-cell devices. The CNT current collector consists of a network structure of cellulose microfibers at the micro-scale, with micro-pores filled with the applied conductive electrode materials reducing the overall internal resistance for the cell. A bending test revealed that the paper-based electrodes, compared to metal ones, incurred fewer damages after 20 bends at an angle of 300o. The surface fractures on the paper-based electrodes were shallow and contained than metallic-based electrodes. The micro-pores in CNT-microfiber paper structure provides better adherence to the active material layer to the substrate and inhibits detachment while bending. Half-cells and full-cells using lithium cobalt oxide (LCO), lithium titanium oxide (LTO), and lithium magnesium oxide (LMO) were fabricated and tested. Coin cell assembly and liquid electrolyte was used. The capacities of half-cells were measured 150 mAh/g with LCO, 158 mAh/g with LTO, and 130 mAh/g with LMO. The capacity of the LTO/LCO full-cell also was measured 126 mAh/g at C/5 rate. The columbic efficiency of the LTO/LCO full-cell was measured 84% for the first charging cycle that increased to 96% after second cycle. The self-discharge test of the full-cell after charging to 2.7 V at C/5 current rate is showed a stable 2 V after 90 hours. The capacities of the developed batteries at lower currents are comparable to the metallic electrode-based devices, however, the capacities were observed to drop at higher currents. This makes the developed paper-based batteries more suitable for low current applications, such as, RFID tags, flexible electronics, bioassays, and displays. The capacities of the batteries at higher current can be improved by enhancing the conductivity of the fibers, which is identified as the future work. Furthermore, fabrication of an all solid state battery using solid electrolyte is also identified as the future work of this project.
  • Thumbnail Image
    Item
    Paper-Based Lithium-Ion Battery
    (Office of the Vice Chancellor for Research, 2013-04-05) Aliahmad, Nojan; Agarwal, Mangilal; Shrestha, Sudhir; Varahramyan, Kody
    Lithium-ion batteries have a wide range of applications including present day portable consumer electronics and large-scale energy storage. Realization of these batteries in flexible, light-weight forms will further expand the usage in current and future innovative electronic devices. Lithium titanium oxide (Li4Ti5O12), lithium magnesium oxide (LiMn2O4) and lithium cobalt oxide (LiCoO2) materials have been consistently studied for application in high capacity batteries, and thus considered in the devices that are presented in the poster. Carbon nanotube (CNT) coated wood microfiber papers are used as current collectors, which provide high surface area, flexibility, and texture of paper, with low CNT utilization (10.1μg/cm2). The CNT microfiber paper is fabricated by layer-by-layer (LbL) nano-assembly of CNT over cellulose microfibers. Results from paper-based half-cell batteries show capacities of 130 mAh/g for LiMn2O4, 150 mAh/g for LiCoO2, and 158 mAh/g for Li4Ti5O12 at C/5 rate. These results are comparable with metallic electrode based cells. The fabrication of CNT microfiber paper, assembly of batteries, experimental methods, and results are presented and discussed.
  • Thumbnail Image
    Item
    Poly(vinylidene fluoride-hexafluoropropylene) polymer electrolyte for paper-based and flexible battery applications
    (AIP, 2016-06-01) Aliahmad, Nojan; Shrestha, Sudhir; Varahramyan, Kody; Agarwal, Mangilal; Department of Mechanical Engineering, School of Engineering and Technology
    Paper-based batteries represent a new frontier in battery technology. However, low-flexibility and poor ionic conductivity of solid electrolytes have been major impediments in achieving practical mechanically flexible batteries. This work discuss new highly ionic conductive polymer gel electrolytes for paper-based battery applications. In this paper, we present a poly(vinylidene fluoride-hexafluoropropylene) (PVDH-HFP) porous membrane electrolyte enhanced with lithium bis(trifluoromethane sulphone)imide (LiTFSI) and lithium aluminum titanium phosphate (LATP), with an ionic conductivity of 2.1 × 10−3 S cm−1. Combining ceramic (LATP) with the gel structure of PVDF-HFP and LiTFSI ionic liquid harnesses benefits of ceramic and gel electrolytes in providing flexible electrolytes with a high ionic conductivity. In a flexibility test experiment, bending the polymer electrolyte at 90° for 20 times resulted in 14% decrease in ionic conductivity. Efforts to further improving the flexibility of the presented electrolyte are ongoing. Using this electrolyte, full-cell batteries with lithium titanium oxide (LTO) and lithium cobalt oxide (LCO) electrodes and (i) standard metallic current collectors and (ii) paper-based current collectors were fabricated and tested. The achieved specific capacities were (i) 123 mAh g−1 for standard metallic current collectors and (ii) 99.5 mAh g−1 for paper-based current collectors. Thus, the presented electrolyte has potential to become a viable candidate in paper-based and flexible battery applications. Fabrication methods, experimental procedures, and test results for the polymer gel electrolyte and batteries are presented and discussed.
  • Thumbnail Image
    Item
    Synthesis of V2O5/Single-Walled Carbon Nanotubes Integrated into Nanostructured Composites as Cathode Materials in High Performance Lithium-Ion Batteries
    (MDPI, 2022) Aliahmad, Nojan; Biswas, Pias Kumar; Dalir, Hamid; Agarwal, Mangilal; Mechanical and Energy Engineering, School of Engineering and Technology
    Vanadium pentoxide (V2O5)-anchored single-walled carbon nanotube (SWCNT) composites have been developed through a simple sol–gel process, followed by hydrothermal treatment. The resulting material is suitable for use in flexible ultra-high capacity electrode applications for lithium-ion batteries. The unique combination of V2O5 with 0.2 wt.% of SWCNT offers a highly conductive three-dimensional network. This ultimately alleviates the low lithium-ion intercalation seen in V2O5 itself and facilitates vanadium redox reactions. The integration of SWCNTs into the layered structure of V2O5 leads to a high specific capacity of 390 mAhg−1 at 0.1 C between 1.8 to 3.8 V, which is close to the theoretical capacity of V2O5 (443 mAhg−1). In recent research, most of the V2O5 with carbonaceous materials shows higher specific capacity but limited cyclability and poor rate capability. In this work, good cyclability with only 0.3% per cycle degradation during 200 cycles and enhanced rate capability of 178 mAhg−1 at 10 C have been achieved. The excellent electrochemical kinetics during lithiation/delithiation is attributed to the chemical interaction of SWCNTs entrapped between layers of the V2O5 nanostructured network. Proper dispersion of SWCNTs into the V2O5 structure, and its resulting effects, have been validated by SEM, TEM, XPS, XRD, and electrical resistivity measurements. This innovative hybrid material offers a new direction for the large-scale production of high-performance cathode materials for advanced flexible and structural battery applications.