Malekipour, EhsanTovar, AndresEl-Mounayri, Hazim2018-06-082018-06-082018Malekipour, E., Tovar, A., & El-Mounayri, H. (2018). Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-Based Additive Manufacturing. In Mechanics of Additive and Advanced Manufacturing, Volume 9 (pp. 17–27). Springer, Cham. https://doi.org/10.1007/978-3-319-62834-9_4https://hdl.handle.net/1805/16406Laser-based metal additive manufacturing technologies such as Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) allow the fabrication of complex parts by selectively sintering or melting metallic powders layer by layer. Although elaborate features can be produced by these technologies, heat accumulation in overhangs leads to heat stress and warping, affecting the dimensional and geometrical accuracy of the part. This work introduces an approach to mitigate heat stress by minimizing the temperature gradient between the heat-accumulated zone in overhangs and the layers beneath. This is achieved by generating complex support structures that maintain the mechanical stability of the overhang and increase the heat conduction between these areas. The architecture of the complex support structures is obtained by maximizing heat conduction as an objective function to optimize the topology of support structure. This work examines the effect of various geometries on the objective function in order to select a suitable one to consume less material with almost same conduction. Ongoing work is the development of an experimental testbed for verification.enPublisher Policyadditive manufacturinglaser-basedtopology optimizationArticle