Fu, Yongzhu2014-10-012014-10-012014-04-11Fu, Y. (2014, April 11). Advanced Materials for Rechargeable Lithium-Sulfur Batteries. Poster session presented at IUPUI Research Day 2014, Indianapolis, Indiana.https://hdl.handle.net/1805/5163Rechargeable batteries are essential power supplies for our daily life, and they are widely used in portable electronics, hybrid electric vehicles, and grid energy storage. Lithium-ion (Li-ion) batteries, which have the highest energy density among rechargeable batteries, have reached the capacity limits of current electrode materials, such as transition metal oxides (e.g., LiCoO2, LiMn2O4, and LiFePO4). To meet the increasing demand of high energy density batteries, rechargeable lithium-sulfur (Li-S) batteries are considered as one of the most promising systems with significant potential for many practical applications. Sulfur has a theoretical capacity of 1,672 mAh/g by taking two electrons per atom, which is an order of magnitude higher than those of transition metal oxides. However, several challenges impede practical application of Li-S batteries, such as high resistivity of sulfur, dissolution of intermediate polysulfides, and shuttle of these polysulfides from cathode to anode in Li-S batteries. Significant improvements have been achieved over the past years, but further improvements and better understanding of Li-S batteries are still needed. This poster will present several strategies that have been developed including sulfur-conductive polymer nanocomposites, lithium/dissolved polysulfide cells, sandwiched Li2S electrodes, and in situ formed Li2S cathodes. A nanolayer of conductive polypyrrole was fabricated on sulfur particles, which can enhance electrical conductivity and reduce dissolution of polysulfides. Binder-free carbon nanotube current collector was used in lithium/dissolved polysulfide cells, which exhibit unprecedented capaciteis of 1,600 mAh/g in the first cycle and over 1,400 mAh/g after 50 cycles. Lithium metal anode is used in current Li-S batteries since the sulfur cathodes do not have any lithium in the initial stage, which is a safety hazard. Lithium-rich sulfur cathode materials such as Li2S can allow a variety of non-lithium metal anodes to be used, which can advance the Li-S battery technology to an unprecedented level. However, the high reactivity of Li2S results in limited approaches that have been explored. A sandwiched Li2S electrode consisting of two layers of carbon nanotube paper has been developed which shows high capacities and high rate capabilities. In addition, a novel in situ formed Li2S cathode is developed, which utilizes lithiated graphite as a lithium donor to convert lithium polysulfide Li2S6 to the end discharge product Li2S. These materials and strategies are promising for practical applications.en-USrechargeable batterieslithium-sulfur batteriesOther